Your cart is empty.
Your cart is empty.
This item is used for third brake light. With the convenience of an easy peel off adhesive backing , the material can be put in place, then moved for slight adjustments, stays in place for installation. It's a pretty good choice to replace the old and dull part as an ideal solution for the water leak problem. Check Compatibility table before ordering.
Package includes:
1 gasket with 1 manual
Compatibility:
2009 to 2014 Ford F150
Specifics and Features:
Foam seal , Enough thick foam can provide excellent waterproof performance.
Made of high quality material,can be used for long time normally
Easy to install, perfect cutting edge makes the installation become simpler
Warranty and Customer Service:
1. 90 Day manufacturer warranty since order purchase date.
2. Feel free to send email first if there's any issue before or after purchase. All emails will be replied within 24 hours. Your case will be taken seriously regardless of warranty period.
Dianea
Reviewed in the United States on March 8, 2025
Perfect replacement for my cracked one.
J Popee
Reviewed in the United States on February 26, 2025
Worked great to stop the leak on my 2014 F-150
JayBo
Reviewed in Canada on January 21, 2025
Easy to install and fit perfectly. It’s quite obvious it’s thicker when comparing it to the stock gaskets that leaks, but it’s a bit pricy for what it is.The foam seems quite dense/thick, sure hope this fixes the water leak issue I’m having. If it does it’s a great purchase!
Travis
Reviewed in Canada on September 30, 2024
Double checked the packaging label and I did receive what should be the correct 2009-2014 3rd brake light seal. Isn’t even close to the right side. It’s nearly 2 inches too long and can’t be used after removing my 3rd brake light… waste of $30. 😢
Brett
Reviewed in the United States on September 23, 2024
Product as described, worked perfectly. Truck was leaking due to original gasket failing around third brake light. Gasket was easy to install and thick- it made for a good seal.
Mike in PA
Reviewed in the United States on August 31, 2024
My generation of F-150 is apparently prone to developing leaks around the 3rd brake light. The water then finds its way into the cab and creates a mess. This foam seal is supposed to be thicker than OEM, but it's hard to tell, as 11 years have passed and the OEM foam has compressed and dried over that time.The lens cover is quite simple to remove, as there are only 2 screws holding it on. The three lights are a simple twist and remove. I cleaned the area on the cab where the old foam met the metal. I cleaned the residue that found its way under behind the plastic cover using a small bristle brush. Standard house cleaner or detergent work, just don't use much. I had some water get trapped in there, but not much, and by studying paper towel down each light hole, i was able to dry it out. If your patient a day in the sun would work.The foam itself is cut well and very easy to install. It falls right into place on the lens, and the adhesive is quite strong. I had no issues during installation and or after a hard rain. I can't speak for its longevity, but this is really good product.
Big E
Reviewed in the United States on July 27, 2024
I use it to replace the gasket on my brake light on my 2012 f150. When it rained , water would leak into the cab. I followed the instructions and it worked perfectly!
Feinleigh
Reviewed in Canada on July 22, 2024
Cheap foam quality. Doesn't stick well, too firm. Better off buying waterproof gasket from hardware store. Works better
Glen Swarbrick
Reviewed in Canada on June 28, 2024
Solved my water leak problem
Customer
Reviewed in Canada on December 15, 2024
Product is as described but too thick. Installing it after removing aged seal required compressing the seal using screws provided for existing third brake light is not recommended. Too much tension that could lead to cracks in lense around screws. Took the time to reduce thickness with an exacto blade and installed with no issues.
Jason D. Kopala
Reviewed in Canada on October 28, 2024
Replaced leaking stock gasket.. easy to install.. little thicker which i hope keeps the gasket in place unlike factory gasket.
zerowingw
Reviewed in Canada on April 14, 2023
It fit my 2015 F150 accept there a little hard to take off the white paper labelso it need to careful for the take off the white label and it need a special care of that
mark
Reviewed in Canada on April 5, 2021
Super product! Unlike other brands, this gasket is sticky only on one side. (Like factory & sticks to the light) This aids in easy removal when you have another bulb burn out later on. Other brands stick to both sides, so impossible to remove with out damaging gasket.
Recommended Products
