Your cart is empty.
Your cart is empty.By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Alidis
Reviewed in the United States on April 6, 2025
Buen producto. La calidad es buena para el precio.
Dave VanBelleghem
Reviewed in Canada on July 29, 2024
The bushings are narrower than the original bushings.With the cost of shipping it's not worth sending them back.
Kyle De Priest
Reviewed in the United States on August 28, 2023
These bushings worked great, the knocking on my Mazda 5 is gone. Doing these on the rear is a piece of cake. Doing these on the front, however, is a nightmare. If you were going to do these yourself, make sure you have a huge variety of tools. Long ratchet handles, short, ones, Deep sockets, shallow sockets, bent wrenches, lots of curse words… it’s a huge job that took me hours. The pictures are of the old ones I replaced. Absolutely a pain to get to these.
BG
Reviewed in the United States on June 10, 2022
This item appears to be equal to OEM durometer and fit. Worked well on my 2008 Mazda 5, Front
Client d'
Reviewed in Canada on January 14, 2022
ok
Sorin
Reviewed in Canada on November 13, 2021
The original Mazda sway bar bushings held pretty good.Needed to replace them when the car reached 170k km.Used the Moog sway bar bushings based on their great review...Recently needed to replace the shocks in my car and I was also looking to see how theMoog bushing held up.Unfortunately I've seen that some chunks of rubber are missing ( it's around the slit - the area where the bushings are cut so that they can be installed around the sway bar).This is pretty bad .... The original bushings were one piece when removed them... is just that the rubberhad a larger hole in it due to wear over time.I plan to buy new bushings from a Mazda dealer next time.I'm surprised to see the high score this item received - which is pretty deceiving...Anyhow - since my car is fairly old ( 14 years old) I'm trying to keep the costs low... but there are some items for which that's not a good idea...Well... this is one of those items.
MA
Reviewed in Canada on August 29, 2020
Satisfied
leonardo melendez Alvarado
Reviewed in Canada on June 22, 2020
Excellent qualité
JP and Annie
Reviewed in Canada on May 24, 2020
Great OEM replacement bushings on my Mazda. The sway bar has noticeably less play than it did before the Moog bushings were installed. Be sure to TAKE YOUR TIME and use a lot of WD-40 on the bolts before attempting to remove them. I broke the first bolt that I tried to remove and it was a pain to fix.
Kevin
Reviewed in Canada on May 20, 2020
Well done, after replaced the front sway bar bushings on my 2010 Mazda 5, the annoying clunking/rattling noise was gone.
F P
Reviewed in the United States on March 24, 2018
Replaced these sway bar bushings on my 2009 Mazda5 with only 62K miles - really made a difference in the noise level coming from the front. No more thumping noises when traveling over bumps and uneven roads. Apparently these are notorious for wearing out but are not expensive or difficult to replace. Took about an hour and only used car ramps as you can reach from underneath and behind the cross member. You will need an offset 14mm wrench and a stubby 3/8" ratchet with a shallow socket to effectively get these replaced. Use a little WD40 to loosen bolts if rusty but wipe off so as not to contaminate the bushings. If you have small to average size hands it will help out as it is a tight fit.
Customer
Reviewed in Canada on August 28, 2017
Installed on 2006 Mazda5. We all know this model squeaks in front swaybar over time. Get it replaced with Moog. No more annoying sounds!
Mr. and Mrs. G
Reviewed in the United States on April 30, 2017
These worked well to silence the sway bar from making knocking sounds. Would buy again.
Recommended Products
