Your cart is empty.
Your cart is empty.Product Description
519-CCB2216L
About NICHE
NICHE specializes in the highest quality Powersports replacement parts. Our parts meet or exceed the quality of the original parts that come with your machine. Some of the NICHE product categories include cylinders, brake pads, axles, off-road mirrors, and drive chains. Let NICHE components fix your machine today!
NICHE Rear Hand Brake Cable 519-CCB2216L
Cable Type: Rear Hand Brake Cable
- Includes: Rear Hand Brake Cable
- Compatible with the following brands: Yamaha
- Compatible with the following models: YFM 350FW Big Bear 4WD
- Replaces for the following OEM MPN's: 05-0173,3HN-26341-00-00
Cable Comparison
Clutch Cable
What is it?
- A clutch cable allows the vehicle to change gear
Why Replace?
- They break, the constant stress of the cable sliding in and out causes a break at one of the end.
- The cable casing gets damaged due to being close to moving parts, damaged housing causes the cable to bend and corrode.
When to replace?
- A common sign that your clutch cable is damaged and needs replacing is if the clutch lever is stiff or your gear shifts aren’t smooth
Throttle Cable
What is it?
- The engine of your bike needs air and fuel to run. When you turn the throttle, it connects to the pull cable and pulls open the butterfly valve. This allows air to enter the intake manifold
Choke Cable
What is it?
- A choke cable is designed to restrict the flow of air in the carburettor of an engine
Choke Facts
- There is no harm using the choke to start an engine. When it’s cold, it can be a necessity to get started
- Using it a choke will only lead to increase fuel usage, but no damage to the vehicle.
Pull Throttle Cable
What is it?
- This is the cable that pulls open the valve when you turn the throttle. It allows air to get into your engine
When to replace?
- You should replace your throttle cables after three years or 10,000 miles
- If a cable breaks, frays, or you change your handlebar you will need a different cable as well
Push Pull Throttle Cable
What is it?
- A dual cable throttle operation where the pull cable opens the throttle plates, while the push cable, along with a throttle return spring, closes the throttle plates
Installing Tip
- When installing a new cable, make sure to note the routing of the original cable. Also, the dimensions of the new cables must be identical, allowing for the fact that old cables do stretch over time.
Maintenance
- After a race or as often as possible after washing to remove the cables from the bike and flush them through with a blast of air. Also the nipples can also be lubricated, with copper grease
Push Throttle Cable
What is it?
- The push cable is a safety addition, there is a spring that will close the valve whenever the throttle isn’t activated but if the spring fails the push cable safely closes the valve.
When to replace?
- You should replace your throttle cables after three years or 10,000 miles
- If a cable breaks, frays, or you change your handlebar you will need a different cable as well
Luc P.
Reviewed in Canada on February 19, 2025
Ce cable de freins arrière remplace très bien le cable d'origine de mon VTT Yamaha big bear 350 de l'année 1989.Même s'il m'a été possible de débloquer mon ancien cable j'ai constaté que la gaine était usée et que le déblocage ne durerait pas longtemps. Ce nouveau cable fonctionne très bien et le rapport qualité prix est bon
Daniel
Reviewed in Canada on September 29, 2024
Fit my atv and is cheap and seams to be good quality
Steve Patterson
Reviewed in the United States on August 10, 2024
I purchased this cable to replace my handbrake on my 1996 Yamaha big bear 350. The cable was easy to install and worked perfect and so far seems to be performing just as it should. Seems to be a decent quality cable and I am very satisfied With this purchase
Tom
Reviewed in Canada on March 18, 2024
Item was exactly as illustrated/noted. Actually arrive a day early and was perfect fit.
Clint J. Church
Reviewed in the United States on November 11, 2024
Worked as it should although the cable was a little shorter than the original.
Me
Reviewed in Canada on April 3, 2024
I ordered the brake cable for a 1994 big Bear 350. The description States it is a direct replacement fit for that ATV. It is not a direct fit and is actually too long. Therefore, you cannot adjust out the amount to slack in the cable. I measured it in comparison to my old cable and this one is 2.5 in too long.Also, this is apparently a third party seller and you have to pay to return the item. This was their mistake mislabeling the product or having very very poor quality control with a Chinese part and now making the customer pay to return it.Please check Google reviews. There seems to be a disconnect between the negative reviews there and the positive reviews on Amazon leading me to believe that there's an issue.I got no problem paying for a cheap aftermarket part and I don't expect it to last forever. It just needs to fit and work and if it doesn't it is not my issue. The company should be paying for the return.Essentially you buy a part from them. You will be stuck with it. Buyer beware, buy from someone else with a proper return policy.
Sara W.
Reviewed in the United States on July 26, 2023
it works
Darcy Ditcham
Reviewed in Canada on December 29, 2023
Fait très bien tres Rapide pour la livraison.Maintenant on va voir comment longtemps qu'il va durer.
grenier gaetan
Reviewed in Canada on November 21, 2023
semble de tres bonne qualité mais pas encore installer
Pete Currie
Reviewed in Canada on October 4, 2023
Perfect fit for my 99 Yamaha Big Bear 350 4wd
Yves Savaria
Reviewed in Canada on October 28, 2023
Livraison rapide
Recommended Products
$17.22
$ 8 .29 $8.29
$24.86
$ 12 .06 $12.06
$24.83
$ 12 .82 $12.82