Your cart is empty.
Your cart is empty.Description NINJA regulators can toggle from STANDARD 800-900 PSI output to a medium 650 PSI or low 450-550 PSI output in a few minutes by removing shims. This eliminates the need to purchase 2 regulators or separate spring kits. Features MADE IN THE USA! All black tactical look Ninja Aluminum valve cap included SRT piston ?Sonic Recharge Technology piston-plated aluminum piston that produces an industry leading recharge rate and virtually eliminates reg shoot down SPA ? Shim Pressure Adjustment- change output pressure by adding or removing shims, not springs or pistons MFV ? Mini Fill Valve ? Non wrist digging, low profile design fill valve Meets all DOT, CGA and ASTM specifications Completely rebuildable by the user Every regulator is hand crafted and factory tested Super low response curve 0-50 psi from full to empty Safety ASTM COMPLIANT bonnet thread ASTM COMPLIANT DOT burst disc ASTM COMPLIANT Low pressure burst disk ASTM COMPLIANT Restrictor, bleed hole and safety groove Mini Fill Valve is hardened, plated 5000 psi rated Regulator installed to ASTM specifications
Brian
Reviewed in the United States on May 29, 2024
Works perfect.
Kyle Swenson
Reviewed in the United States on February 15, 2019
I inserted this regulator by hand about 4 turns. Went in smooth then got stuck. I tried to back it out. Put tank in vise and turned on head and the regulator fell out because the threads broke off in tank..... both are now ruin!!! 😡 This is garbage! And there is now place to contact seller.
Customer
Reviewed in Canada on March 10, 2017
Arrived well ahead of expected date. Works great so far. Reg is NOT exactly as pictured/shown, it has the dual o-rings, and ball bearing valve of the newer gen regs, not the old pin style. This is actually an upgrade over what is shown. The only way it could possibly cause a problem is with some obscure old marker, with a special ASA type. Swapping the regs was a bit of a pain, having the proper tool would be a big help. As for swapping it out, unless you know exactly what you are doing, PLEASE do not try messing with your own tank. Take it and the reg to a PB/scuba dive shop, and ask them to swap it for you. Most of the serious injuries in PB have all been caused by tank failures, as have several fatalities. Also, NEVER allow oil to get into the tank or reg. It WILL blow up. Not trying to scare people off, just don't want someone getting hurt because someone didn't know any better.
Customer
Reviewed in the United States on November 2, 2016
It is a good product. I used it to replace the reg on my 68/4500 Valencia tank. The PSI gauge sat a little lower on the reg compared to stock which caused it to barely fit... but it does fit. I wish it had come with at least a tight fitting plastic cap for the quick recharge, but that can't be held against the seller. Good buy
CD
Reviewed in the United States on June 27, 2014
Bought this regulator to replace a busted reg on a 4500 PSI HPA tank when I first got back into paintball. Love Ninja products...the quality is fantastic AND the fact that they're adjustable (by way of removing or adding shims) is awesome! Their customer service is top notch, if you ever need them.
BaronVonRotterdam
Reviewed in the United States on May 25, 2011
All of my family has Ninja compressed air tanks. I however decided to be the blacksheep and bought a crossfire tank. Well long story short my regulator had a leak in it from the get go and then started leaking from the fill input. So I bought one of these nifty regulators and ripped off my old crossfire one. Now I am running a crossfire tank with a Ninja regulator. The regulator is very accurate and it comes with neat accessories. And best of all not only was it really cheap it was made in the USA.
Recommended Products
$55.61
$ 26 .63 $26.63