Your cart is empty.
Your cart is empty.A new and innovative way to secure pegs and hooks to a pegboard. These peg locks are easy to use and hold the peg or hook in place. Pegitz peg locks hold the peg or hook in the hole so it is less likely to fall out when an item is removed. It is removable, reusable and helps to preserve your favorite holes. Pegitz Peg Locks come in multiple colors to allow color coding of your work space. They also come in 2 sizes to fit regular and thin hooks. Pegboard hole size must be at least 1/4" in diameter (standard size). If you are not sure of hole size, you can try inserting a 1/4" drill bit by hand into the hole to verify. If hole is too small, you can fix by using 1/4" drill bit to widen. Installation Tips: 1. If the Pegitz part is hard to insert into the pegboard, it is typically because the holes are smaller than 1/4 inch. You can fix this by using a 1/4 inch drill bit to widen the hole. 2. If the hook is hard to put into the Pegitz part once installed in the pegboard, you can "Pre-Stretch" the Pegitz part by pushing it onto the hook BEFORE inserting into the pegboard. Then, remove hook and install into pegboard as normal. If the pegboard holes are too small (see #1 above), it can make the hook harder to insert.
Ron Fuchs
Reviewed in Canada on August 13, 2024
Works well to help secure pegboard accessories.
John Raeburn
Reviewed in Canada on June 19, 2024
Good product. Works very well.
M. Richard
Reviewed in Canada on May 6, 2024
Fit my 1/4" pegboard perfectly and held the 7/16" hooks very snugly. Simple to use.
Steveny
Reviewed in Canada on March 13, 2024
Great product when peg hook straps cannot be used.I usually use peg hook straps for securing, but sometimes they cannot be used in certain situations.When that happens, i use peg board locks and they are a great alternative.Only negative is that these are ridiculously expensive.
Dave
Reviewed in Canada on October 25, 2024
They work way better than the stupid clips that come with peg board hooks
Maryse Provencal
Reviewed in Canada on January 27, 2024
En plus d'un prix abordable, ces "verrous" retiennent vraiment bien les crochets. Par contre, c'est un peu difficile de bien rentrer les crochets en place mais par la suite, ils ne tombent plus à chaque fois qu'on prend un outil. Certaines formes de crochets restent un peu plus relevées mais ça ne nuit pas à l'utilisation. Pour moi, ils font la job.
Dave
Reviewed in the United States on August 15, 2023
These little wonders are game changers. I have a metal pegboard, so, it has zero grip on uncoated metal hooks... they just want to bounce around and pull out with just the slightest bit of jostle. These Pegitz solve that problem effortlessly.I was concerned that they'd be difficult to remove if I wanted to reconfigure, but they come out super easy. It's a stiff rubbery material but it's soft enough to pinch and pull out to remove it - it won't come out on its own, but it's easy to remove.The grip on the hooks is fantastic, you do have to give it some oomph to insert the hook fully, but once it's in there, it doesn't want to move at all. I honestly went with a metal pegboard because I figured I'd be using magnetic hooks for most stuff because regular hooks won't stay put, but these are so easy to use and work awesome. I didn't want to use the other style hard plastic pegboard clips because they tie up the adjacent holes and they're kind of fiddly.
Rev. Graham Lindsay
Reviewed in Australia on December 10, 2023
I managed to get plugs into the ¼ inch holes but with great difficulty. They didn't go in easily; however, they don't come out easily either. For someone my age (78) there was not enough strength in the fingers to force them in so I had to widen each hole I used just a fraction and I used a small screwdriver to help me push the locking blocks in.
Luke O
Reviewed in the United States on November 28, 2023
Overall I really like this product, they make the usually floppy and prone to falling out pegboard attachments actually stay in place which is very convenient. Ive bought 3 packs so far and one thing that the product really doesnt mention which i thought was notable is 50 pcs might seem like alot, but when you have one standard attachment that has two pegs that go into the board, that means that there are only realistically 25 attachments worth of locks. It also is not the easiest thing in the world to install them. You have to press them fairly strongly with a screwdriver into place. Once they are in though they are very nice and do the job well. I think overall i would give these locks a 7/10 baised on how hard they are to install and that i wish the quantity was a little higher for the price.
Mr. Banzaibullivoski
Reviewed in Canada on January 28, 2023
locks in 1/8 pegs firm, no verticle play or horizontal play at all, the only thing you need to watch out on metal pegboard is that these things aren't reusable, once pressed in trying to take them out will rip it in half, so do your planning before you stick them on
Customer
Reviewed in Australia on February 1, 2022
AAA +++
Julienne Rose
Reviewed in Canada on December 8, 2022
The media could not be loaded.
Dankerr
Reviewed in Australia on April 18, 2022
exactly what i needed for my garage
Recommended Products
