Your cart is empty.
Your cart is empty.Product Description
Wind wheel diameter
Package Content:
Wind Turbine x 1
Blades x 3
Controller x 1
Nose Cone x 1
Set Screws and Nuts x 1
Installation Notes x 1
Anemometer x 1（no battery）
- Application
- 1. For Home Use
- 2. For Monitoring Use
- 3. For Boat / Marine Use
- 4. For Wind Solar Hybrid Streetlight Use And More
Specifications:
Rated power:400 W
Maximum power:410 W
Number of blades:3
Rated voltage:12 V
Start-up wind speed:2.5 m/s
Rated wind speed :13 m/s
Working speed:3-25 m/s
Survival wind speed:40 m/s
Wind wheel diameter: 51.18 inch
- Blade Material: Nylon Fiber
- Generator Type: 3-Phase AC Permanent Magnet Generator
- Braking Method: Electromagnetic
- Wind Direction Adjustment: Automatically Adjust The Windward Angle
- Operating Temperature: -40 ~ 80 ℃
- Magnetic Material: Neodymium Iron Boron
- Cabin Material: Die Casting Aluminum Alloy
High quality
1.The wind turbine is made entirely of high quality aluminum and stainless steel fittings. It is not only lightweight, small in size, but also compact in shape.
2.The blade material is made of high-strength plastic with 30% carbon fiber and anti-UV anti-corrosion material, which is both beautiful and durable.
3.The surface of the wind turbine is coated with a special process that provides excellent resistance to oxidation and corrosion under any harsh conditions, as well as excellent corrosion resistance, water resistance and sand resistance.
High efficiency
1.Three-phase permanent magnet synchronous motor. Efficient and compact ac generator with high performance NdFeB permanent magnet.
2. A fully integrated voltage regulator that automatically shuts down when the battery is fully charged.
3.The fan is controlled by MPPT intelligent microprocessor, which can effectively adjust current and voltage.
4.The unique magnetic circuit design makes the starting torque very small, which can effectively ensure the wind turbine's breeze starting ability.
Easy installation
1． Nesting the black leather cushion inside the reducing joint of the wind turbine then putting the tower inside reducing joint. Connecting the cover of reducing joint by screws and fastening. Tightening the screws by hex key.
2． The three wires of the wind turbine are connected to the transmission cable, each pair of wires is not less than 30 mm, and the tape at the connection end is at 100 mm.
3． Connect the wind turbine's cable to the controller and the battery must be connected to the controller before wiring.
Controller description
Max Discharging Current:30 A
Wind turbine power: 400W(12V)/800W(24V )
Solar Panel power: 500W(12V)/1000W(24V)
Wind Generator Braking Voltage:14.5V/29V
Wind Generator Recover Voltage:13.2V/26.4V
Open circuit protection/Under Voltage protection/Automatic over-charge braking/Battery reverse connection protect
Feature:
1. Convenient to extend Solar panel with our Hybrid charge controller if you want in latter. Just need one Solar and Wind hybrid controller can use 500W Solar panel + 400W Wind turbine together for 12V battery.
2. Wind Turbine starting with low speed; high wind energy utilization; beautiful appearance; low vibration on operation.
3. Wind Turbine Blade adopt reinforced fiber nylon which more durable and strong ability of Anti-wind. With optimized aerodynamic shape and structural design, has a High wind energy utilization.
4. Our wind turbine adopting patented permanent magnet rotor alternator, with a special kind of stator design, decrease resistance torque of the generators efficiently.
Installation instruction：
1. The wind turbine should be installed where there is strong wind or no tall buildings and obstacles, If installing the wind turbines near the obstacles, the position is better as far as possible from obstructions, or the installation height should be 20Ft higher than the top of obstructions(As show), which can make full use of the wind power.
2. We can make use of the growth effect on the hills (As show). It’s a good place to set up
3. It's should avoid the cliff, the turbulent region.
F00bar
Reviewed in the United States on January 12, 2025
Setup was really easy, took me about 10 minutes to assemble and a little extra time to wire it up. I’b testing, it was generating power until an anchor came loose and it faceplanted, crushing the nose cone. Support was easy and they are sending me a replacement. I’ll update this when I start running it again.
C. Peabody
Reviewed in Canada on March 14, 2024
This is our second Wind Turbine Generator. We tossed the first one as it never turned. We should have heeded the advice of the reviews.This one however has worked much. better. It's not going to power much of anything but it's great to watch when it gets enough wind to spin it.We hooked it up to a set of LED lights and when it spins, the lights illuminate.It should be noted that these units rarely turn. You need very, very strong winds.Good enough.
Philip
Reviewed in Canada on December 3, 2024
I bought this 400-watt wind turbine with a hybrid controller.I painstakingly erected a wind tower about 35 feet tall. The next day, the wind was blowing at 30 to 40 kilometers per hour.My system is equipped with an amp meter so I can monitor the power going into the battery, the voltage, watts, and the total amount of power charged or drained to the battery in real time, 24 hours a day.As for solar charging, it was winter, so it was charging up to 200 watts even when the sun was shining.At night, I watched the wind power. The turbine was spinning very fast, with the occasional bump, but no power was coming out.I contacted the seller and he said it could be a controller issue and he would send me a simple wind charging controller.The seller was very kind and accurate.I put the controller back on, but even though the wind was blowing very hard and the turbine was making a rumbling noise, the power on the amp meter only reached near 40 watts and then dropped off quickly and stayed 1~10W. With a working speed of 3 to 25 meters per second as the ad, or max 90 kilometers per hour, the turbine should generate 400 watts at 90 kilometers/h. However, if the wind speed is 40-50 kilometers per hour and it only generates about 40 watts, not even 100 watts, I doubt that I can expect a maximum of 400 watts.It would be more reliable if there was a graph showing wind speed and power generation, but the seller doesn't have one. The seller was kind and trustworthy enough to refund my money, but the product is very disappointing. I wouldn't have been as disappointed if it had been labeled as 100 watts instead of 400 watts. With such low power production, I'm wondering if I should take down my hard-earned wind tower again. The cost of the pipes, hardware, etc. that went into building the tower is not cheap.Please consider my case before buying it.
David P.
Reviewed in the United States on December 17, 2024
If you use the right wire size to install, it works like it is supposed too. D.Z.'s review with the wire size is not accurate. They don't know anything about 12 Volt electricity. The wind turbine is 30 Amp's and controller requires 10 Gauge wire. 12 Volt electricity degrades fast with distance. The small gauge wire coming out of the wind turbine and controller is the right size, For Very Short Distances, like 1 foot. 10 Gauge wire is the smallest gauge to be used for a 30 Amp Devices. You might think connecting 16 Gauge wire with 10 gauge wire is wrong, but it is not. I had to use 50 feet of wire from the Turbine to the Controller. At 50 feet, I had to bump up my wire size to 8 Gauge. If you are not sure about wire size, do some homework to make sure. Once again, this is for 12 Volt systems. AC electricity, with the help of transformers, can go great distances from power stations to power stations. 12 Volt power degrades quickly and it would be lucky if it made it out of city limits before it degrades to nothing. Just look at the size of the battery cables in your car. Hopefully, no one will do what D.Z. did. We are having a very windy day as I write this and the turbine is working perfectly.
Nancy Allard
Reviewed in Canada on June 25, 2023
Bonjour a tous , les 3 fils vert se branche sur éolienne, le noir et rouge vont sur le positive et négatif, le fil jaune et bleu vont où et si ont les branches pas ça fonctionne quand même?Une lumière verte allumée et une rouge qui clignote.
Henry C.
Reviewed in Canada on December 7, 2023
They were good to send a new replacement quickly
isaac
Reviewed in Canada on December 10, 2023
Jai acheter cette éolienne 400w mais dans les gros vent elle produit pas plus de 100w mais combiner a des panneau solaire cela peut quand meme etre bon
Z
Reviewed in Canada on October 4, 2023
Works good
Mark
Reviewed in the United States on September 18, 2022
I installed this product in Jan 2022. It's nice and assembled well, and I was excited to see it spinning. It looks nice. But as far as actually generating power, it's not going to be much use. I am not saying it doesn't work at all, but when I finally made some current measurements on the thing, it did "some" power generation when it was spinning in a super strong wind burst, but other than that, not much of anything. Maybe if this thing is in a hurricane all the time, it may get you power. But just on a general farm field, it did not get me much, if anything.I hooked up 2 100W solar panels to the controller, and then that DID generate power. So the solar panels worked.I did contact customer service, and they had me do some troubleshooting. But then they wanted me to take the unit down and put a drill on it and make voltage measurements. That is not unreasonable thing to do, but I just got too busy to do it. Since the solar was getting me by, I just went with it.Around July 2022, I noticed the Solar stopped working. I did some troubleshooting and the controller was dead. I just put in a new solar controller for now and got my solar pump back up and running. I contracted customer service about the warranty on this wind turbine controller, but I got no response.So, I give it 2 stars for looking nice, and working with the solar panels. However, it main purpose is to generate wind power; which it does not actually seem to do very well at all.
Kelly
Reviewed in Canada on July 30, 2022
This wind turbine is great. We were able to tie our solar panels into this and only have 1 controller with the system. We run this and 4 solar panels and this turbine runs perfectly, with no issues.
MONICA MOLINA NIETO
Reviewed in Mexico on January 13, 2022
The media could not be loaded.
EMGG
Reviewed in Mexico on July 14, 2021
VIENE CLARO EN SU INTERCONEXION, EFICIENTE Y CONFIABLE
M. Pell.
Reviewed in Canada on November 27, 2021
There was a defect of fabrication in the unit we received. I communicated with the client service team, they responded quickly! After sending them a video of the issues I was having they refunded me fully! I bought another Pikasola wind turbine model and that one works perfectly!! Overall very satisfied!!
Recommended Products