Your cart is empty.
Your cart is empty.Harmonic Balancer Repair Sleeve
Client d'
Reviewed in Canada on September 29, 2024
tres bien
Patricia Vargo
Reviewed in the United States on December 22, 2022
see install problems with product in some reviews ..if you put hub or balancer in freezer...and warm the sleeve ..add little lube, tap and slips right on with no effort ..then take a green pad or 1000 grit wet/dry paper deburr and smooth out this is for the inexperienced installers as same with crankshaft timing gear warm up the gear to remove or replace ..lube crank snout and it slides right onto the crank easy peazy ...that will help the issue with installation....do not just use a piece of wood and bang the crap out of the crank ..(thats the caveman method not good ) use the method i described ...im 58 yrs old so really im 18 yrs old with 40yrs experience building engines..lol...Vmans Custom Cycles and Speed Shop..
Don
Reviewed in Canada on December 9, 2020
I put the balancer in the freezer for a few hours then heated the sleeve and it went on easily.
Randall E. Kirkham
Reviewed in the United States on December 26, 2019
Part is very thin walled as it needs to be but it crumpled up when I gently tried to install it. Should have been made of hardened or spring steel. Buy the National brand as it comes with an installer cup but install with a press if you have one to keep it lined up square.
Randy Frasure
Reviewed in the United States on July 23, 2018
perfect fit
Barry Simmons
Reviewed in the United States on September 25, 2017
worked as needed
steve Lewis
Reviewed in the United States on December 9, 2014
Not much so say about it. It arrived on time, the typical Amazon way! Fixed my slow oil leak.
Recommended Products
CA $187.27
CA $ 92 .99 CA $92.99