Your cart is empty.
Your cart is empty.Product Description
CV Joint Boot Clamp Pliers
Use with any banding up to 2/5-inch (10mm) in width; Suitable for ear-type hose clips found on a fuel hose, cooling system, and vacuum hoses; Also use to secure late model GM CVJ; Plier works on steering gear gaiters and fuel hoses on various brands of cars; Can be used for working on Oetiker System hose clamps.
Package Includes
Includes 2Pcs CV Joint Boot Clamp Pliers With 3 Pair Clamps.One piece plier with 4.25-inch (10.8cm) long plastic handle and 1-inch (2.5cm) long rubber grips on side levers for ultimate comfort.
Step 1
Thread the band through the drip into the nose of the tool and through the winding mandrel slot.
Step 2
Place a 1/2" ratchet wrench on the winding mandrel and turn.When sufficient tension has been applied,rotate the tool over the boot.bending the band back onto the drip.
Step 3
It applies tension and has a built-in cutter.
Step 4
To compiete clamping fold down the remaining tail of the band into the clip and secure it by tapping down the ears of the clip.NOTE:for added strength double wrapped band is recomended.
Wide Applications
Includes 3 X small clamps and 3 X large clamps. Made of stainless steel, they are very tough and can lock items very firmly. The locking teeth stop the tie at the desired length and get tighter with each pull. If you need to cut off the excess, you must use the CV Boot Joint Ear Clamp Banding Tool to do so.
Johnson
Reviewed in Canada on February 7, 2025
Horrible quality, three big clapms broken, had to buy a different kind clamp from parts store. Used different tool to tighten the new style clamp, the clamp bended the tool. It's funny
Customer
Reviewed in Canada on February 17, 2025
the little rods kept falling out, but it wasn't really an issue. it cut the boot clamp very well and it wasn't difficult to figure it out how to use it. not sure if it came with instructions, didnt read em anyways. my co-workers and me were laughing the whole time while i was using the tool cuz i kept having to stop and put the rods back in lol. either way we were all surprised when it cut it and crimped it. kept the tool for future use.
Camo
Reviewed in Canada on April 1, 2025
Worked ok but clamps didnt hold, tried twice and ended up just buying a whole new cv axle
Marie Claire
Reviewed in Canada on November 10, 2024
Does the job perfectly fine but would more appreciate if they can make the middle flat tooth in the T shape Clamp a little bit elevated with more gap in the jaw in close position
Sergio
Reviewed in Canada on September 22, 2023
facile a utiliser
Travis
Reviewed in the United States on August 23, 2023
This was not usable for my application
Monty
Reviewed in Canada on June 20, 2023
Second kit I have purchased. I have one in the garage but wanted to carry one in my trailer for my Side by Side in case I needed to do a CV boot while out camping
R.C.
Reviewed in the United States on January 9, 2023
I get it, you get what you pay for. In this case, it was a total failure. I initially got the box with a missing tool. I was okay with that since I didn't feel like I needed the other tool. Unfortunately things I needed ended up breaking on me not even after the third time I tried using the metal straps. The metal straps it came with didn't even last very long and the tool that it came with could not even cut through it anymore when I had to shorten the length. Also the gloves it came with ended up ripping right away. I definitely do not recommend getting this product!
Customer
Reviewed in the United States on August 30, 2022
Good quality and work great
Brandon
Reviewed in Canada on December 7, 2022
I used these to change a cv boot on a range rover.....they did the job sort of, but the clamp didn't get as tight as I would have liked, the tools themselves are cheap feeling and not of the highest quality. The other issue is if my axle was still in my truck, there would have been no room to work with the tool, that being said, that's not really the tools fault
Simon Albert
Reviewed in Canada on July 12, 2021
pruduct seems cheap but what can you say about the price ....it does the job
Jonathon O.
Reviewed in the United States on April 13, 2021
I bought this tool kit not understanding how to use and when I received it there were no instructions. The 2 tools are for different types of clamps: the pliers are for crimping (slide the band into its tightest locking position then crimp the head to tighten) and band (the type of bands in the kit). The band tool took a little getting use to (watching YouTube videos) but was easy to use once all the steps are understood. Unfortunately I wasted a couple clamps trying to figure it out before seeking out a couple videos
SoundOff
Reviewed in the United States on July 22, 2020
I was OffRoading and torn the dust boot off of my front drive shaft.Pros:- Relatively Cheap- Seem to be solid enough toolsCons:- No Instructions on use- Not the best qualitySo I was replacing the Slip Boot on my front drive shaft and found that I could not complete the job without this tool. I had several options from getting a beefier single plier to this two tool unit. I have to say that I am very happy that I choose to purchase both tools.I was able to use the pliers to clamp the forward most ring. However, this was not without much effort. This tool does not allow for very much leverage and the steel the ring was made of was solid OEM part. So it took a lot of attempts to finally get it crushed enough to tighten up the ring. Other pliers, or should I say more expensive pliers have leverage holes that you can put in a breaker bar to get more torque.That said I was unable to fit the tool in to do the rear ring. So I tried out the other banding tool. Which actually worked like a charm. As mentioned I had never used either of these tools before and had to do a quick YouTube search to learn how to use them. The pliers were straight forward enough but the banding tool not so much.For this hopefully one time repair. These tools did the job, however, if I had to do this again not sure if I would choose these tools again. While they worked .. just not certain about the quality. They felt like that might break in my hands. However, they did not and did complete the job and that is something.
Recommended Products
CA $29.99
CA $ 15 .99 CA $15.99
CA $150.00
CA $ 62 .99 CA $62.99