Your cart is empty.
Your cart is empty.QWORK
SUSAN J. BORDONARO
Reviewed in the United States on March 26, 2025
It didn’t fit the saw I bought it for so we returned it!
bessette sylvain
Reviewed in Canada on February 9, 2025
Il est bien mais pas à 100% pour tout les modèles de ban de scie mas il est bien c'est pour ça que je lui donne un 80%
Customer
Reviewed in the United States on February 7, 2025
This item had several mixed reviews, but I read through them and bought it anyway. I have a older Ridgid tablesaw that doesn't have any type of riving knife or splitter, nor have I found one made for it for anywhere near a reasonable price... So, I built my own. This guard was very easy to work with and very easy to modify for my needs. The vacuum hose attaches without any issues at all and it does a decent job with controlling the dust when making rip cuts. I have it attached in a way that it can be easily removed when using my sled or dato blade. It does have a small burr where the lower pieces of plastic meet that will need to be filed down to stop it from catching your workpiece. I like the fact that it covers my blade, but it is clear so I can still see what is going on underneath when making a cut.Will this fit directly on your saw?? Probably not. You will need to modify the fit for your specific needs.I DO recommend this item! and I would purchase again should the need arise.
PimpinCrispy
Reviewed in Canada on May 18, 2024
I bought this to add some protection to my old Delta Cabinet saw. If you are handy enough to use a table saw you should.be handy enough to modify this to work with many different saws. I had to trim it down and notch it out so that i could get my throat plate all the way in. I expected to have to modify it and it works as well as i had hoped. No complaints. For the price. Totally happy with my purchase!
Remoldex
Reviewed in Mexico on May 14, 2024
Excelente calidad solo hice un orificio ala misma guía metálica de mi sierra y ajuste unas calzas y quedóbien 👍
Lester
Reviewed in the United States on March 26, 2024
I bought this for my Harbor Freight Hercules table saw. I've had the saw for about 4 years and it works well except for sawdust collection. The supplied riving knife in this QWORK product was not the right size to replace the Hercules knife, so I had to adapt the plastic guard to make it fit the Hercules knife. I removed the screws holding the guard cover together and carefully removed plastic (with a small saw, chisel, or file) near the back where the Hercules riving knife needed room. That done, it was a simple matter of re-assembling the guard and attaching the guard through a hole near the back of the Hercules riving knife. When used with a dust collector, the blade guard works well and greatly reduces sawdust coming up from the blade. It has much less effect if you use a shop vac for a dust collector.
Neeve
Reviewed in the United States on December 19, 2024
Did not really fit my table saw. Very difficult to figure out. Did not use.
Michal
Reviewed in Canada on January 23, 2024
Good item. I have Ryobi 10" table saw. Vaccuum outlet 1 1/4" or 31mm works well with my hose. Plastic is blurry/milky a bit but no issues to see what Im cutting. Had to modify original bracket to fit, delivered bracket doesn't fit for now. Strudy structure. Happy for the price.
John Pittaway
Reviewed in Canada on April 5, 2024
Works well, needs to bet adapted, wasn't to hard to do.
Martin
Reviewed in Canada on April 11, 2024
I have an older Delta SM200L table saw which came without the blade protector and splitter from the previous owner. This cover looked promising, so I bought it. Unfortunately, the whole thing has to be installed on the outside of the table saw where the bracket is, not on the inside close to the blade which makes a bit challenging. The outer install moves the splitter about 4" behind the blade which may not be ideal. Again, not a perfect fit, but it's better than not having any protection. I'll just have to be mindful of the blade height and raise the plastic cover or it will destroy the clear plastic cover.
Wilfred Ellerbeck
Reviewed in Canada on December 4, 2023
Just as the description states.
ed
Reviewed in Canada on October 21, 2023
Did not fit in old table saw. Not at all
Steve Brooker
Reviewed in Canada on October 14, 2023
Had to modify it a little bit, but overall worked fine.
Recommended Products
CA $93.06
CA $ 43 .99 CA $43.99
CA $22.63
CA $ 10 .99 CA $10.99
CA $46.90
CA $ 23 .99 CA $23.99