Your cart is empty.
Your cart is empty. Round platform, diameter 240mm, widely used for Kossel Delta 3D printer, works good with all kinds of hotbed.
How to use it?
1. Attach ReliaBot Strong Adhesion Platform to the 3D printer hot bed.
2. Level the platform.
3. Set the correct temperature for the bed based on different materials
※ PLA: 60-70 °C (70 °C is recommended)
※ Flexible filament: 60-70 °C (70 °C is recommended)
※ ABS: 100-125 °C (110 °C is recommended)
※ PC: 100-130 °C (120 °C is recommended)
※ Nelon: 90-120 °C (110 °C is recommended)
※ PP: 100-130 °C (120 °C is recommended)
※ PETG: 60-70 °C
Note: Before printing, please level the bed first.
>Widely used in 3d printer MK2Y PCB and MK3 aluminum heatbed print surface
>The material has excellent thermal and chemical properties
Packing list:
1x 240mm Round Strong Adhesion Plate
Matteo Munaretto
Reviewed in Italy on July 9, 2023
Finalmente dopo mille ricerche, ho trovato questo vetro per la mia Delta Kossel Pro. Ottima superfice di stampa. Il pezzo aderisce perfettamente al vetro e terminata la stampa e atteso il raffreddamento della superfice, il pezzo si stacca senza difficoltà. Provato con PLA e PETG. Consigliatissimo
John A OBrien
Reviewed in the United States on April 21, 2021
I purchased this for my daughter for a printer I have given her. I have a Anycubic Kossel printer and now she does also. What I found is that this is a must have for the most 3D printers. It will stick the print to the base ( I use PLA) and will release on cool down. You may still have to pull on them but they do come loose. Most of the time you do not have to use a putty knife to get them off. The base is also very flat as it is made of glass. I used some RTV cement on the corners where the hold downs where and it worked perfectly. Need to have the rough side facing up. Great product and low price. Worked perfectly.
Izzy
Reviewed in the United Kingdom on October 25, 2020
Very happy with this build plate. The plate which this one replaced was somewhat problematic with occasional peeling. So far, with this new plate I haven't had any issues and my prints have gone very well! Really happy with the product!
Heshokima
Reviewed in Germany on May 22, 2019
Ich habe die Glasscheibe bei größeren Objekten meistens ohne Haftmittel benutzt. Nur bei Objekten mit kleiner Auflagefläche kam ein Leim/Wasser Gemisch zum Einsatz.Bei PLA und PETG gab es keine Probleme, das Druckbett hatte ich mit 60°C bzw. mit 75°C beheizt. Die Objekte hielten während des Druckens und nach einer kurzen Abkühlung „sprangen“ sie ab oder ließen sich leicht ablösen. Gäbe es keine anderen Filamente, meine Bewertung läge irgendwo zwischen 4 und 5 Sterne.Leider gab es mit großflächigen Drucken mit ABS (90°) ziemliche Probleme, die Werkstücke haften zu gut und beim Abkühlen reißen sie regelrecht Stücke aus der Oberfläche.
James Golden
Reviewed in the United States on September 9, 2018
So far this is working well. The rough side really dose hold the extruder filament. Heating the glass up to 70 degrees C take a little time but when it cools after the print, the object will just pop off. Keep it clean and wipe it down with alcohol after touching it.
Recommended Products
