Your cart is empty.
Your cart is empty.Skunk2's MegaPower exhaust Silencers are engineered as free-flowing mini-mufflers. Each silencer is manufactured from perforated, stainless steel tubing that's wrapped in stainless steel wool and mesh for significant noise reduction and minimal restriction.
GSEVIG
Reviewed in the United States on July 8, 2024
Much more drivable now. Cut the noise down tremendously without choking out motor.
Tristan
Reviewed in Canada on March 17, 2024
Though it's not perfect, (welds,mesh could be better) however it functions much better than any of the generic pipe only style silencers. You can expect a 40-50% noise/drone reduction. Exactly what I was after, no more angry neighbors still sounds decent. Fits a 4.0" tip.
Q
Reviewed in the United States on December 5, 2024
i have a three inch skunk 2 exhaust installed on my car. factory fit lines right up. just make sure you check the bolt that holds in in every once in a while. mine rattled out one day driving and i no longer have it. i put the bolt facing down and used the nylock nut.
TOM UNG
Reviewed in Australia on December 18, 2020
Great works perfect and arrived next day, all other Melbourne stores where out of stock till next year and Amazon was $30 cheaper free postage happy as can be 🙂🎄 A++
Regis
Reviewed in Canada on January 21, 2020
Worst just like it's supposed to. Still sounds great just not such a heat bag and really reduced the inside car drone. Perfect fit too. Installed on my 8th gen si coupe with full skunk2 megapower catback ..
Yan Katcharovski
Reviewed in Canada on March 21, 2019
Honestly very surprised with how perfect it is ! Reduced the noise in my loud Subaru to a perfect level... Still sounds great but no long obnoxious. Highly recommended !
HotshotChu
Reviewed in the United States on March 14, 2019
The media could not be loaded.
Raj Gadhiya
Reviewed in Canada on December 13, 2019
I have a Celica gts. Recently did muffler delete and It got so loud it would bleed your ears. And dron was horrible while driving on highway like you would get hearing loss after a long trip.But this bad boy fixed everything. Removed dron by 80% and my exhaust sounds awesom. It's still loud when you want it to but and quite when crusing.I tried this because it has mesh to absorb sound unlike normal silencer with just plain pipe. I got that plain silencer with my muffler but barely makes any difference
T. Busch
Reviewed in Canada on October 12, 2019
I installed this on an MBRP 4" system on a 2019 F150 2.7 eco. It cut the volume by half, and cut the boominess by ~75%. Nit ideal for flow, but if you need to shut up a 4" exhaust system to keep the wife happy but want a large exhaust to let it breath, this works. Installed in 5 minutes.
Raafat Nasser
Reviewed in Canada on October 9, 2018
Quiets down the raspy noise and keep it aggressive and deep! Works with any 4inch exit tips!
Adrien Smith
Reviewed in Canada on April 25, 2018
Works awesome sounds a lot better now, it's not annoying anymore for long trips.
Ken L.
Reviewed in the United States on December 15, 2017
This worked out great. First off, it is designed for the Skunk2 exhaust. If you don't have that exhaust, it may not fit very well. I drive 70 miles one way to work, and the drone from the muffler was getting to be a little much. I put this in, and it cut my drone at least in half. Possibly more. I'm sure it will quiet a little more after carbon build up as well. It fit a little snug, but that's a good thing. I added some Loctite 242 to the nut and bolt before assembling. Let it set for a minute or two. Tighten the bolt really tight. If you want a really secure bolt, you can even add some Loctite after it is secured. I did not have it pop out, nor does it rattle. You could add a little tack weld to the bolt and nut with a mig welder if you really want to be sure, but then that will eliminate the ease of removing the silencer for shows, or just to get loud. I'll update if anything changes. In summation, good fit, works great, no issues.Silencer is still firmly attached. I have had no issues with it even coming loose. I'm running this in my 2014 Civic Si, with Injen intake, and Skunk2 Alpha header. Works great. Fixing to pop it out because I am missing the noise.
Customer
Reviewed in Canada on January 6, 2017
perfect. perfect fit. perfect sound. crisp. eliminates the LOUD obnoxious noise part out of the exhaust . still pretty darn loud but a whole lot cleaner sound. would definetly recommend if youre trying to tone down the car.
Recommended Products
CA $57.00
CA $ 28 .99 CA $28.99
CA $33.48
CA $ 14 .99 CA $14.99
CA $765.00
CA $ 99 .00 CA $99.00
CA $29.06
CA $ 12 .99 CA $12.99