Your cart is empty.
Your cart is empty.Product Description
STM32F405 MCU, More Powerful Than F411, More Compatible Than G4
More Features
Meteor LED Function.Customize Your Own Style
When connecting the LED strip, use the included BEC for voltage regulation.LED strip need to be purchased separately.
Configure FC ESC & Equipped with ICM-42688 Gyroscope Hardware Filtering Further Enhanced!
With an independent LDO power supply and PSRR suppression ratio up to 100dB, the output ripple is reduced to just 1.3mV! This boosts gyroscope accuracy and enhances flight stability.
Equipped with New SPA06-003 Barometer Precision Further Improved!
Barometric measurement accuracy increased to 0.5%, and relative pressure accuracy improved to ±0.03hPa, equivalent to ±0.25m.
Michael
Reviewed in the United States on March 25, 2025
Best AIO you can get. So easy to hook up to your phone and use BF (SpeedyBee) to change settings or tune in the field.
Crad
Reviewed in the United States on March 15, 2025
I'm using this in a 145 gram airframe. The 1104 motors are doing well with it. The pads can be tight... Very tight. However, the board seems undamaged by a short I created when adding components. The fault appeared by destabilizing the gyroscopes or accelerometers, causing a shifting yaw axis. Once cleared, the board operated as advertised.
Charles
Reviewed in the United States on February 21, 2025
Great little FC ESC combo. Only issue I've had is the negative grounding points on the board, ordered one directly thru speedybee on pre-release and one thru here. Both had same ground pad soldering issues. Have to super clean the ground points with iso and soft brush in order to get good soldering penetration and not have the solder joints pop off.Hooked directly thru betaflight, all components are good from factory, flies stable.
Jessee Johnson
Reviewed in the United States on January 6, 2025
I have bought a few of these now. They work great and take minimal space 😁 hook ups for everything. Have been flying these since they were first released and no problems yet. They are durable and powerful. I will be getting more 😁
Scotty
Reviewed in the United States on January 3, 2025
Works extremely well. Ran about 20 packs through with zero issues. A little heavy but worth the weight in cooling. Worth every penny.
jeremy emsley
Reviewed in Canada on December 29, 2024
A little heavy for an AIO but works great and can handle alot of crashes and keep working, in the motors tab with bidirect dshot on you will notice small error's at 4k x dshot 300 i found this to be nothing to worry about all works with no problems but if this bothers you just run 2.7k x dhsot 300 and that goes away this is something runcam/speedybee should take a look at also be very careful if you decase it theres is a lot of glue holding the heatsink on and because of this very easy to damage this AIO its best just to leave it on as its still lighter than a stack.
Recommended Products