Your cart is empty.
Your cart is empty.The new Core V1 represented by Thermaltake is a small and cute ITX based chassis with a 200mm fan in the front panel. Smart interchangeable side panels allow users to flip it accordingly to showcase either for superior liquid cooling or superb airflow, which allows you to make your own personal setup. You not only grant to have a really powerful mini system, it also has the ability to house various overclocking components to keep it really cool. Fan support front: 1 x 120mm or 1 x 140mm or 1 x 200mm , rear: 2 x 80mm, radiator support front: 1 x 120mm or 1 x 140mm
にゃん亭
Reviewed in Japan on December 9, 2023
Mini-ITXでビデオカード用ではなくPCIE2スロットあるボードを組むための箱として。汎用的なATX電源が使えることも、その配置が下部にはっていることも良いです。電源が1階、マザボが2階、ストレージは側面と言った配置です。一件工作しづらそうに見えますが、フェイス以外はフルオープンになるので、組み立てはとてもしやすいです。ファンはフェイス裏に給気用のでっかいのが付いています。背面側に小さいファンが2つ着けられるスペースが用意されていますが、フェイス裏のファンによる二種換気で十分かと思います。お値段も安いですし、ストレージを大量に積むことが無いならいいと思います。
guillermo m.
Reviewed in Spain on December 5, 2021
Muy buena caja para montar un servidor para el salon
kazaablanca
Reviewed in France on October 6, 2020
Extrêmement satisfait de ce boitier, qui rend bien les services escomptés et de plus est très pratique par la facilité de montage/démontage des façades. bon rapport qualité prix. Je trouve le look final bien mieux que celui d'une tour et c'est ce que je cherchais.le gros ventilo sur la facade avant ne fait pas de bruitMonté avec une carte mère Itx B550I aorus, (et alimentation ATX BeQiet 700W qui a un logement bien séparé.Les plaques amovibles pour support des disques SATA (2,5 et 3,5") sont bien pratiquesj'ai mis un ryzem 7 3700x qui ne pose pas de problème de hauteur avec son ventirad d'origine (reste 4 cm de marge par rapport à la face vitrée du dessus).Finalement beaucoup de place libre pour la circulation de l'air et aussi le passage des câbles.Pour l'instant j'ai une "petite" carte graphique que je compte changer pour une carte plus grande. Il y a de la place sans pb jusqu'à 255mm et même 285mm en jouant sur l'arrière. ça me suffira amplement.Que du bonheur !
Tony Lin
Reviewed in Canada on September 21, 2019
For $60, with a decent fan (not best), I say it's a great beginner's case for SFFPC builders. If you're not use to working with small spaces in assembling a PC, this case would give you the luxury of alot of room. The material is a very soft metal frame and panels. I stepped on a frame and bent it, but was able to undo the bent with my hands.Pros:- Decent and quiet fan below 660RPM- Easy to build with- Big card-board box to hold all of my other SFFPC parts and boxes- Great design and modularity of the panels- Space to put a M.2 SSD on bottom of Motherboard (recommend to remove the M.2 heatsink if it comes with one, very tight space)Cons:- Annoying bright LED- Front IO confuses windows (windows doesn't sees it as a USB 3 IO hub sometimes)- Noisy fan past 660 RPM- No instructions book- Not great space for very large GPUs past 250mm- Pain in the ass drive-bays that don't support 2.5in drives (need a 2.5in to 3.5in adapter bracket)- Not enough dust filters- Doesn't isolate sound very well.- USB port is of low quality, one port died on me alreadyEdit: After just over a month, I found out one of the USB ports on the front IO is dead, and can't be used anymore. I believe the other port may died out soon as well, as it's anything stuck in it seems to be loose and wiggles alot if you move it.
G. Mulcaster
Reviewed in Canada on July 19, 2019
At almost 12" x 12" x 12" I wouldn't really call it small (a Mac mini or an Intel NUC is small) but it's a compact (mini ITX) and very nicely laid out case. The fit and finish is great and the layout is terrific. The 200 mm fan at the front uses a brushless motor and pushes a ton of air straight back through the case.The metal on the drive carriers is a little thin (unlike the rest of the case which is great) but they are still more than strong enough to each hold a 3.5" and 2.5" drive. Installed dual M.2 cards onto my motherboard so I've removed the drive carriers won't be using them. Cable management is about as good as it could be given the relatively cramped environment, all my cables are neatly out of the way and not blocking the airflow from that giant fan with just a couple of zip-ties).The side panels are all interchangeable (so you could mount the computer on it's side if you wanted to), two panels have a large section of vent holes and the third panel has a large clear plastic window. Personally I would rather it be a solid metal panel but it's not a big deal.There are mounting points on the back for dual 80 mm fans to move warm air out of the case. The front of the case has dual USB3.1 Gen 1 ports, a pair of USB 2.0 ports would have been a nice addition, as would a USB-C port.The power and HD activity lights have a nice soft glow and aren't ridiculously bright (like my other case).Conclusion: It's a terrific case and I would buy it again without hesitation if I was building another computer.
Marvin
Reviewed in Germany on December 22, 2019
- hohe Verarbeitungsqualität- fester Stand- Boden, beide Seitenteile sowie Oberteil können einzeln abgenommen werden (jeweils mit 2 Schrauben befestigt)Ich suchte ein Gehäuse mit bestimmten maximalen Abmessungen. Dieses Gehäuse bot den größten Platz und das beste Preis-Leistungsverhältnis. Ich würde es wieder kaufen.
Kook
Reviewed in the United Kingdom on November 1, 2019
I've been building PCs for about 30 years and have done lots in that time. This is without doubt the easiest Mini ITX case I've used. Cable management is excellent, there's plenty of room to manoeuvre, and airflow is very good. I didn't use the supplied fans, but replaced them with Noctua 200mm and 2x 80mm PWM fans. I have also ordered some magnetic dust filters as this case has lots of openings and as well as keeping dust at bay, it should help slightly with noise.The paint job is pretty good, there's not much in the way of sharp edges, either. The case can easily fit a full size ATX PSU, but this will eat into your cable management space in the bottom of the case.I built this as a home NAS and have managed to squeeze in 4x 3.5" drives, 2 in the supplied brackets, one in the floor panel and one to the left of the motherboard, the latter two had to have custom mountings made, but it's turned out well.With regard to cooling, I fitted a Noctua NH-C14S with the fan on top, there's just about room for this and I will probably end up changing the window panel to the left side and the perforated panel on top for the fan to draw cool air in.Overall, very impressed and really wasn't expecting to be.
Craig
Reviewed in Canada on August 16, 2017
This is the best PC case I have ever owned. Hands down. Bar-none. I was going to buy the BitFenix Prodigy mITX case in arctic white, but then I found out this baby is less than half the cost and has three times as many features. If you're a gamer, or you want a small workbench/testing PC case, this is the best option in something small. Next best option is the HAF-XB, but it's almost fully three-times larger. This baby is small, quiet, well-designed, cable management is a freaking breeze, and the top and side panels are fully interchangeable (one is windowed). There's a front-mounted 200mm whisper-quiet case fan, and the rear can be mounted with two 80mm case fans set side-by-side. Plenty of space for a full-size PSU, and the bottom panel comes off for easy installation. This is easily the easiest case into which to install components, and cable management is facilitated because everything is reachable. Seriously, if you want a small case and don't buy this right meow you will regret it.
Recommended Products
$143.28
$ 64 .07 $64.07