Your cart is empty.
Your cart is empty.Truetone's 1 Spot Pro CS6 pedalboard power brick boasts a sleek, low-profile design and powers any combination of pedals on your pedalboard. Its six fully-isolated power outlets drastically minimize the noise in your setup. Onboard you'll find two 9-volt outputs, two outputs switchable between 9 and 12 volts, and another two outputs that are switchable between 9 volts and 18 volts. You'll also get all the necessary cables and adapters. Individual toggle switches on the bottom of the power brick let you set up any combination of power values. That means you'll be able to power your existing pedals, and you'll also be covered when you get new pedals with different power requirements. The Truetone 1 Spot Pro CS6 pedalboard power supply is one of the most streamlined and capable powerhouses available today.
PD51
Reviewed in Canada on July 28, 2024
It fits nicely under a Pedaltrain Nano, has 9, 12, and 18 V switch selectable output options, and comes with a complete set of cables to connect to the pedals.
Josh
Reviewed in Canada on June 2, 2024
Good isolation, versatile with dipswitches, awesome form factor. No problems.
Client d'
Reviewed in Canada on October 22, 2024
Alimente très efficacement mon pedalboard. Très silencieux même avec les pédales exigeantes. La configuration amincie est idéale pour la hauteur de mon pedaltrain.
misterdister
Reviewed in the United States on April 22, 2024
I downsized my board to a pedal train nano plus and my voodoolab pedal power 2 no longer fit. When mounted, it fits just as perfectly (tried velcro first but it made it a bit too high). The mounting instructions were very say but I still managed to drill one hole slightly off despite the template. I just drilled another hole right next to it to widen and problem solved. The screws don’t stick out at all on the front side, but I would recommending drilling through the Velcro so that screw head sticks out as much as the Velcro - very small amount- and it’s then even surface.Power seems to work great and came with all the cables I needed. Love it!
Enrique Millan
Reviewed in Mexico on September 9, 2023
La verdad me gustó mucho tiene varios cables para la conexión, y elimina el ruido muy contento con la compra
LuckyLucy
Reviewed in Canada on August 25, 2022
Truetone cs6This is the one you want to buy for a true no fuss no noise power supply thst has ample juice for digital pedals and analog pedals. Mixing digital and analog pedals almost always results in hums and whining noises when you use daisy chain or non-true isolated power blocks. Almost all of them on Amazon that are under 100$ don't work. And for the ones that ARE true isolated bricks, they aren't robust enough and they break !! Don't waste your time with cheap power supplies. Just buy this.Very versatile. 2x 500ma plugs for your high power digital pedal needs. 2x200ma plugs and 2x100ma plugs for your other pedals. Perfect for compact pedal rigs.Comes with assorted barrel connector cables with coloured straight ends and other side is 90degree bend.My setup is for acoustic guitar and I have the following: tc electronic polytune3, tc electronic HOF mini reverb, LRbaggs align session , and LRbaggs voiceprint DI. With all 4 of these pedals. Zero interference, no high pitched whining and no extra hiss or hum introduced with this CS6.I bought a bunch of cheaper power bricks and ended up returning them all because they're noisy and make whining noises. I did find one here on Amazon called ISO10 which was amazingly cheap at 100$ and it was almost as quiet as this CS6 however it broke !!! So clearly not reliable. I Highly recommend biting the bullet to just buy this.
Jamin' D
Reviewed in Canada on March 24, 2022
Great power supply and easy to use, amazing price and a blue led!
Client Kindle
Reviewed in Canada on January 13, 2022
Received it today...changed my life. I can't compare to others, I had cheap power supplies (like 5$). It was awful in my FX loop, super big hum. Now? It's clean,clear, clean or lead chanel it's like magic. So...is it worth the price? I don't know, but it sure works flawlessly. Ty truetone!
Joan Tuareg Chávez Medina
Reviewed in Mexico on April 12, 2022
Simplemente el mejor, lo instale y me olvide de que existe, justo lo que necesitas de una fuente de poder
Pierre
Reviewed in Canada on March 13, 2021
This is what you want !Start thinking about saving bucks and collect gift cards. The CS6 is made for all pedaltrain models !Special thanks to Dana Weaver at Truetone who guided me to make the right choice for my needs.Voici ce que vous voulez !Commencez à penser à économiser de l'argent et à collecter des cartes-cadeaux. Le CS6 est fait pour tous les modèles de pedaltrain!Un merci spécial à Dana Weaver de Truetone qui m'a guidé pour faire le bon choix pour mes besoins.
Eric G.
Reviewed in Canada on February 19, 2021
I purchased this power supply to get rid of a noisy echo pedal and it worked perfectly. Isolated power source with no or near no background noise when supplying multiple pedals from the same board. A great buy and value for its price. Note that it comes with a lot of accessory that should suit most of stompboxes...
A.Lee
Reviewed in Australia on January 16, 2021
I bought the One Spot CS6 to upgrade from an un-isolated multi-output power supply. I'm very happy with the low profile, light weight and quiet operation of this unit. I also like it's ability to power additional pedals with a daisy chain. It makes an audible difference if you've been using sub-standard power supplies and gives you confidence that it won't run out of "grunt" when you need it.
BotFixer
Reviewed in the United States on July 15, 2018
Clean power supply, with electrically isolated plugs (no shared grounds or 9-volt power rails), lightweight, and most important for me: the LOWEST PROFILE (just under 1.25" tall) of any isolated power supply so it can fit UNDER a slanted wooden pedal board.I have an old Gator pedal board with custom tote bag (model GPT-PWR) and a power supply mounted underneath -- the Gator 8-port G-BUS-8 (). One day my pedal chain started sounded super hissy -- tons of high-pitched white noise. I eventually diagnosed that it was the power supply that was failing, not the pedals (had to disconnect and check each pedal on its own with a 9-volt battery).I did a ton of web searches for high-quality isolated power supplies and as far as I can tell this is the thinnest one made. Yes, it only has 6 output ports whereas the G-BUS-8 has 8. But if you have more than 6 pedals you can get a daisy chain cable and run several low-power pedals off one of the two 500 mA outputs. For example, here's a 3-to-1 cable (), and here's a 5-to-1 cable (). Yes, using a daisy chain cable defeats the purpose of an isolated power supply for the pedals that are chained together -- I'm just saying, if you need more than 6 pedals powered with the CS6, there's a simple way to do it.Finally, there is no obvious way to attach this thing underneath a wooden pedal board with screws -- the installation video on the Truetone web site shows how to do it for thin metal only. I decided since the unit is so light (1.3 lbs) I would try using velcro strips. I put 3 strips of hook velcro across the top of the CS6, with matching loop strips underneath the board, and it seems VERY secure under there.
Recommended Products
