Your cart is empty.
Your cart is empty. How to use it:
1. Put the gasket into the connector, confirm whether the intake valve and release valve are closed, and turn the pin switch of the small cylinder adapter to the top.
2. Connect the large carbon dioxide tank.
3. Connect the small paintball co2 cylinder.
4. Turn the pin switch of the adapter to the bottom to fully open the cylinder valve.
5. Open the intake valve (the first valve from the large water tank, not the large water tank handwheel).
6. Easily open your big tank handwheel and listen to a little one. When you pinch it, open it a bit until it keeps open. Wait about 30-60 seconds until you hear no gas flow and filling can be completed.
7. After filling, turn the handwheel to stop the carbon dioxide.
8. Turn the pin switch to the top to isolate the paintball cylinder.
9. Open the escape valve to release residual gas.
10. Remove the small cylinder.
Marc B.
Reviewed in the United States on January 26, 2025
this is a good unit hose is quality connections are solid valve is good.I use it for transfering to my 20oz tanks from a #20lb co2 tank.It can be used for filling other tanks as well.
B. Arnold
Reviewed in the United States on September 19, 2024
Works good, seals good to the big tank. Put the little guys in the freezer overnight and you can watch the frost go away as ya fill them with liquid CO2. My XL-18 has never been happier. LOL
Customer
Reviewed in the United States on July 28, 2024
Refill station was affordable and worked like a champ. Easy to use and store
Robin.
Reviewed in the United States on June 5, 2024
Económico
Tony Brooks
Reviewed in the United States on February 21, 2024
so far works pretty good, no problems
brian ritchie
Reviewed in Canada on April 24, 2021
Instructions would be incredibly helpful.
Recommended Products
$18.59
$ 7 .91 $7.91
$47.43
$ 19 .43 $19.43