Your cart is empty.
Your cart is empty.Knifeless Tape is a filament-bearing adhesive strip made to deliver clean, precise, detailed lines every time. Simply lay the Knifeless Tape down on your vinyl wrap surface in the desired layout, wrap the surface with your desired vinyl, then pull the tape’s filament up through the vinyl to slice cleanly through the excess. This product is flexible, easy to use and perfectly suited to decorative or graphic wrap projects. Get perfectly smooth cuts and precision vinyl wraps every time with Knifeless Tape! Easy and fast to use at any skill level. Suited to any vinyl graphic installation project. Get great results in just a few easy steps: 1) Lay the flexible tape down on the wrap surface in the desired formation, straight or curved lines. 2) With the knifeless tape still on the surface, wrap it in your desired vinyl. Be sure that the end of the tape is not covered. 3) Take firm hold of the fibre and pull it up through the vinyl and you're done!
Dan B
Reviewed in Canada on February 3, 2025
The felt stickers that you place on the blue smudger are utterly crap. They don't stick and keep lifting off.Ended up just putting a cotton sock over it which glided smoothly
M. Moore
Reviewed in the United States on January 25, 2025
Used this to add stripes to our RV. Worked perfectly. Just make sure to leave enough to cleanly start the cutting process.
Jason Lambert
Reviewed in the United States on January 16, 2025
Buy extra works great but goes fast . Buy extra for sure you will need and won't go bad .
Alan
Reviewed in Canada on May 3, 2024
No tools arrived in package. Tape has worked well though
PHANI V ADUSUMILLI
Reviewed in the United States on December 31, 2024
No issues
C
Reviewed in Canada on July 9, 2023
Adhesive on wrong side, useless.
DJ Juice
Reviewed in the United States on September 6, 2022
Works as it should. Takes some practice if you have never done it before. Watch the videos first. I wasted quite a bit learning how to do the vinyl wraps but that was my fault not their's. Lol
freddie & kelly
Reviewed in Canada on April 1, 2022
I love using the knifeless tape it works so well
bill russell
Reviewed in Canada on June 14, 2018
Everything as shown and on time.
Dale Halvorson
Reviewed in the United States on November 13, 2016
The cut tape was ok, you have to be careful that when you make tight turns that the string under the tape does not move . The only time I had issues with this was on the right turns when I pulled the tape up to reposition it a few times . Getting the cut string started is a little bit tricky , just make sure to leave your self 6" beyond the edge of your vinyl or more , it gets easier after you have done it a few times . The actual sharpness of the cuts was impressive , I did not want to use a knife that close to my paint so this worked perfectly.The only thing I really did not like about this kit was the felt sticker that goes on the squeegee. It was completely useless . & ended up using double sided tape to secure it on . Kind of a silly thing to be picky about , but it would have takes seriously no effort from the manufacture to just put a better adhesive on the felt .Lastly , this 10M tape was barely long enough to do my bumper , so if you're planning on doing anything larger , I would but a different kit . I think I ended up finding one for an extra $5 that had almost 5x the length of tape .Reading some reviews of other knifeless tape , this brand was supposed to be the best . I was happy with the results of the tape, like I said just be extra cautious of pulling the tape up and down around curves or the string could move , and could cause your cut to come out poorly . Leave your self 6"-12" extra at the end , and practice with a few small scraps if you can spare it . Keep in mind the length you really need for your project I would hate to have to stop the project to order more cut tape .
Recommended Products
