Your cart is empty.
Your cart is empty.Spider Gear Kits from Yukon are designed for individual differential applications and manufactured from high quality metals to ensure a long lasting product that offers higher quality than OEM.
C.H.L
Reviewed in Canada on December 10, 2020
Package includes 2 sets of clutch packs, and the retainer clips. The clutches have little groves in them which is different than the picture in the product description, so I’m happy about that.Just got the clutches in, on first glance they are of extremely good quality, they seem identical to the clutches that were in my rear differential, very happy about that. Will be installing today and give an update later on after I put some km’s on them.Make sure to let them soak in friction modifier, I’m using CRC’s posi-trac friction modifier.Installed in a 2010 Ram 1500 with the Chrysler 9.25” diffUpdate for anyone installing in a Ram 1500 with 9.25” Chrysler diff:These things are bitch to install, you have to take the whole carrier out and to do that you have to loosen hex adjusters accessed through the axel ends. There’s a special tool to do this, buy it before attempting this install.Easy way:To install the spider gears , you have to compress the side gears with the clutch packs on the back. To compress them you use a big ass bolt, Yukon gear has a YouTube video on youtube to do this called “How to rebuild a Trac-Loc positraction”Hard way:I installed the clutches without taking the carrier out but I highly recommend you do, I was in a time crunch. I used electrical tape to keep the clutches and holding clips in place with the axel in as a guide to install.For the spider gears basically you need three guys, each with a crow bar and a snipe to compress the clutch packs by prying on the axel hubs. Then with one guy prying and another with a bar on the wheel studs, rotating the carrier so the spider gears go around until their in place. There’s a whole lot more to it but that’s it in a nut shell. It sucks, good luck.
David B. Knowlson
Reviewed in the United States on November 18, 2019
product looked so good it could have been oe.
christina
Reviewed in the United States on October 27, 2019
98 dodge ram is what i used it for
Piper
Reviewed in the United States on April 2, 2018
Looked everywhere trying to find this. Hard to come by. Exactly what I needed. Perfect fit.
Justin Barbeau
Reviewed in the United States on March 16, 2017
From my experience, Yukon are some of the best components you can get for your axles. However, Kit does Not contain two side gears, two pinion gears, cross pin shaft, roll pin. This is for the clutch packs and retaining clips.
Martin Beauregard
Reviewed in Canada on January 16, 2017
Livraison rapide ,j'ai hate de les installé
UNION
Reviewed in Canada on February 13, 2015
Good
James
Reviewed in the United States on May 21, 2014
These are a pain in the ass to put in but they were right ones. make sure you do your research before you pull one of these apart cause you will need a special tool to compress the spider gears and clutches in order to get the other spider gear shims in where they need to go. 100 miles so far and no problems yet....
Recommended Products
CA $273.34
CA $ 99 .00 CA $99.00
CA $85.87
CA $ 34 .99 CA $34.99
CA $226.81
CA $ 89 .99 CA $89.99