Your cart is empty.
Your cart is empty. Spec:
Item Type: Wind Turbine Controller
Material: Aluminum Shell
Product Size: Approx. 10x8.5x3cm / 3.9x3.3x1.2in
Rated Battery Voltage: 48V
Rated Wind Turbine Capacity: 600w
Wind Turbine Braking Voltage: 60V
Wind Turbine Recovery Voltage: 54V
Protecting Grade: IP67
Display Mode: Led (Light Emitting Diode Display)
Package List:
1 x Wind Turbine Controller
How To Use:
1.Connect the positive and negative terminals of the battery to the positive (red wire) and negative (black wire) terminals of the battery of the controller respectively.
2.Connect the three phase output voltage of the wind turbine to the three phase input (green wire) terminal of the wind turbine of the controller respectively.
Note:
1.Confirm that the wind turbine output voltage is the same as the rated voltage value of the battery.
2.Connect the wires in the following order, first connect the positive and negative poles of the battery, then connect the three phase voltage output of the wind turbine.
3.Please connect the battery and wind turbine to the controller in strict accordance with the instructions, reversing polarity or connecting in the wrong position will cause the system to work abnormally, and even cause damage to the controller.
