Your cart is empty.
Your cart is empty. When you plan to go out, you find the car battery is lack of power, it is necessary to own a good battery charger to charge and maintain your batteries when there is emergency.
The 2Amp 6V/12V smart cbattery charger is a helpful tool for users to charge the battery of car and motorcycle safety.
They may also help restore drained and sulphated batteries.
Specifications:
Battery Type: Fit all type of 6Volt and 12Volt AGM, GEL, Flooded(Wet), Calcium type deep cycle, VRLA maintenance free lead acid batteries
Battery Capacity: 4Ah - 40Ah
Input Voltage: 100-240V AC, 50-60Hz
Output Voltage: 6V 2Amp / 12V 2Amp
Minimum start voltage: 7.0V
Charge Type: 3 stages fully automatic with trickle charging
Working Temperature: 65'C+/-5'C
Cooling: Fan
Switchmode technology: Yes
Compliant standards: CE, IEC60335, EN61000, EN55014
Size: 130*75*50mm
Weight:280g
Very simple to use this little battery charger
(1). Check your battery parameters are compatible to the charger (at the back of the charger).
(2). Connect the red clamp to the positive pole (+), black clamp to the negative pole (﹣).
(3). The LCD display will show battery voltage, charge current and inside temperature (Temperature is for reference only, allowed tolerance).
(4). Wrong battery connection:“Ero” will display on screen.
(5). Connect the charger with AC power source, the charger will start to operate.
(6). Once the battery is fully charged, the battery bar on screen will in “FUL” status. Keep the charged status in 1-2 hours is highly recommended.
(7). Charging completed, remove the charger or keep connected.
NOTE: For 4AH-10AH battery, we suggest sue "REPAIR"mode,because the battery size is too small,use pulse charge is very good for small size batteries.
Package Contents:
1 x 2Amp 6V/12V Battery charger with clamps
1 x User Manual