Your cart is empty.
Your cart is empty.Product Description
Compatible with Chevrolet Models:
- 2014-2019 Corvette C7 (Coupe & Convertible)
Reference Part Number:
- 22935639, 22935635, 03RSA4505ABK
Note:
- It fits the model for "Grand Sport, Stingray, Z06, Z51", dosen't fit the model for "ZR1"
Advantage of A-Premium Mud Flaps:
- 100% Performance Testing
- 100% New Premium Component
- Meet or Exceed OEM Specifications
Specifications
- Position: Front and Rear(Driver and Passenger Sides)
- Package Type: Box Packaging
- Injection Style: OE Replacement Molded
- Installation: Pre-Drilled (Direct-Fit)
- Color: Black
- Materials: PP+TPE
- Quantity of One Set: 4
Trevor
Reviewed in Canada on May 1, 2024
2016 c7. Rock guards fit like factory. Good product.
Steve st pierre
Reviewed in Canada on January 12, 2024
Good item
Lynn Jordan
Reviewed in Canada on June 9, 2023
GM should have used here from day one
Alex Boies
Reviewed in Canada on May 1, 2023
Tres satisfait pour le prix
Tim
Reviewed in the United States on May 4, 2022
Front seems straight forward. Have to drill for the rear! They do not fit well. Not going to install any of them.
ascanio
Reviewed in Canada on March 15, 2022
Well the mud flaps are ok but the two way tape really sucks....
Ken Butcher
Reviewed in Canada on October 3, 2022
Looks good when finished but had to do a lot of trimming to make it fit properly. The front splash guards just don't want to sit flush against the fender.
TerryP
Reviewed in the United States on February 17, 2021
ProductThese splash guards are of good quality material. Matches with the stock c6 diffuser perfectly. Fitment is very good but not 100% if you want to nit pick. I think it's acceptable, and I'm particular about my cars. The tape is absolute trash, peel that off and throw it away.InstallThe front splash guards are very easy. Used a rivet tool to remove the fasteners and just plugged them back in with the splash guards. Did not bother with the fasteners that came with the guards. Easy as pie and very secure.The rear requires drilling of 4 holes in the plastic parts of the fender wells, which is great because there's no way I would drill into the painted parts of a Corvette wheel well, or any car for that matter.You DO NOT have to remove the wheels if you use a 90 degree angle drill attachment. I picked one up for like 15 bucks. No big deal, and it will be useful for future projects as well. I also opted to use screws with lock washers instead of the supplied fasteners for the rear splash guards because there's not enough room to get your hand in there and push those push pins in with the wheels still on. My goal was to get them on without removing the wheels at all costs. Took about 1 hour, and I think they look great.My recommendation is to get them, especially if you drive your Vette every day, rain or shine. The only very minor gripe is the fitment, but it's passable. They're just splash guards and they seem to do what they say they do.
Mark Loback
Reviewed in Canada on December 8, 2021
The 3 m tape was no good. Defective
Dean Cross
Reviewed in Canada on April 5, 2021
The adhesive tape that comes with splash guards, the red film protecting adhesive was half peeled. The two sided tape is not very good anyways, I replaced it with 3M. The mud flaps them selves, fit decently
Roger Wydick
Reviewed in the United States on December 24, 2020
Would not buy again. Mounting tape was useless, dried out, wound not stick and was falling off the splash guards when received. I had to spend an additional $12 to purchase new 3M mounting tape. Front splash guards fit and worked well with the new tape applied, however the rear, not so much. The offset did not fit well and the provided fasteners would not lock in place. Had to purchase different fasteners, for another $16. I would and should have returned the whole kit, but the holes were already drilled. Again, fronts were fine with new tape, but the rear are not.
Timber R6
Reviewed in the United States on September 28, 2019
Half the cost of OEM (which are made in China as well) and look as good as what I assume OEM looks like. Solid construction, fits my C7 perfectly and look great. Just enough to be different but not enough to look out of place. You’d never know they aren’t stock.
Richard Carter
Reviewed in the United States on November 28, 2019
Perfect fit on my '19 Stingray. The look great too! They extend just a bit more than the stock splash guards but enough to keep road debris from scratching the rocker panels. Easy to install. Took maybe 15 min.
Recommended Products