Your cart is empty.
Your cart is empty.Specification:
Product name: 5V~15V temperature controller
Current: 2.5 A
Connector: 5.5*2.1mm/0.2*0.1in
Weight: Approx.46g/1.6oz
User introduction:
For example, if the input voltage is 12V, control the 12V heater. Press the red key to turn on the switch and the light will turn on. Input voltage up to 12V full input, and then press, second gear around 9V, third gear 7V, 4 gear 5v.5 gear 3V. Press again shutdown. This voltage is used to control the temperature of the heating element. 7.4 v. 5V works the same way
Package list:
1 x Temperature Control Switch
Pablo
Reviewed in Canada on October 20, 2024
Very dangerous unit over heated burnt my seat and pant legWire gauge is not near big enough to handle the amperageStay away from this
Wolf
Reviewed in Canada on October 15, 2024
The connectors are: 5.5 x 2.1 mm where the standard connectors for heated gear are 5.5 x 2.5 mm.
Bigshow
Reviewed in the United States on October 31, 2023
These will NOT handle the snap load for heated gear. I set them on low and they still melted and died within two minutes of use. Unfortunately it just now got cold enough to use them and I messed the return window by two days. Buyer beware, you get what you pay for!
tim sheehan
Reviewed in the United States on October 26, 2023
Plugged it into a 7.4v battery, it does not regulate the temperature, it was full power on all settings including off. I cut off the connectors to see if it would work the other way around and it didn’t work at all in that direction. Will need to return it
Pierre Harvey
Reviewed in Canada on December 15, 2021
Super
Michael Despres
Reviewed in Canada on March 8, 2020
Works great
Recommended Products
