Your cart is empty.
Your cart is empty.Amazon.ca Product Description
Working with tough materials requires one tough, no-nonsense tool, and the Dewalt DC411B cordless cut-off tool is designed to meet those challenges. Its 6,500-RPM motor and 4-1/2-Inch-diameter cutting wheel are perfectly engineered to cut and grind metal. From rusted rebar and steel I-beams to resilient threaded rod and corroded angle iron, its abrasive wheel will slice through most metals quickly and cleanly. And since there's no cord to drag around, you can work un-tethered anywhere at any height or angle. Besides the cutting and grinding wheel, this versatile tool will also accept a Zirconia-grit flap disk, stringer wire wheel, and rubber-backed sanding disc, allowing you to clean, smooth, shape and finish a wide variety of materials, including steel, wood and masonry. The DC411B has a low-profile, jam-pot housing that ensures precise gear alignment for a smoother, quieter transmission while allowing access to tight, narrow spaces. Other commercial-grade features include a two-position side handle, large trigger switch with lock-off button, and quick-change wheel release. The DC411B comes with a Type 27 safety guard, Type 1 cutting wheel and safety guard, two matched flanges, wrench, and side handle. It's backed by Dewalt's 90-day money-back guarantee, full one-year service contract, and three-year limited warranty. The battery and charger are sold separately.
From the Manufacturer
Working with tough materials requires one tough, no-nonsense tool, and the DEWALT DC411B cordless cut-off tool is designed to meet those challenges. Its 6,500-RPM motor and 4-1/2-inch-diameter cutting wheel are perfectly engineered to cut and grind metal. From rusted rebar and steel I-beams to resilient threaded rod and corroded angle iron, its abrasive wheel will slice through most metals quickly and cleanly. And since there's no cord to drag around, you can work un-tethered anywhere at any height or angle. Besides the cutting and grinding wheel, this versatile tool will also accept a Zirconia-grit flap disk, stringer wire wheel, and rubber-backed sanding disc, allowing you to clean, smooth, shape and finish a wide variety of materials, including steel, wood and masonry. The DC411B has a low-profile, jam-pot housing that ensures precise gear alignment for a smoother, quieter transmission while allowing access to tight, narrow spaces. Other commercial-grade features include a two-position side handle, large trigger switch with lock-off button, and quick-change wheel release. The DC411B comes with a Type 27 safety guard, Type 1 cutting wheel and safety guard, two matched flanges, wrench, and side handle. It's backed by DeWalt's 90-day money-back guarantee, full one-year service contract, and three-year limited warranty. The battery and charger are sold separately.
Dominic Woodley
Reviewed in the United States on March 26, 2025
Awesome machine to work with
jewelly
Reviewed in Canada on May 27, 2024
Works perfectly
Steven C. Spackman
Reviewed in the United States on December 17, 2024
Works great. I was glad to a tool that can use my 18 volt batteries. .
BG
Reviewed in Canada on May 10, 2019
You get about 10 minutes of run time on a fully charged battery. That's the most pathetic performance of any of my battery tools. I only bought this because I wanted something compatible with my current drill batteries, and they don't make one for the 36v battery that I also have. It's ok if you only have a couple of spots to grind.
PLPCS
Reviewed in Canada on February 16, 2019
Grinds like electric ones, but kills the battery in a short time. Nice tool to have.
Customer
Reviewed in Canada on February 26, 2018
Exactly what it looks like in the photo. Comes with guard, handle and a disc to get you started. Works good for small jobs, doesn’t have the power of a plug in grinder but that’s to be expected.
Kelly
Reviewed in the United States on January 11, 2017
This is a great tool! I use it as a truck driver who hauls D.O.D & high-security items. The seals that are used on our trailers are the bolt-style and are very hard to cut if you're using bolt-cutters. I hesitate to write the rest of this review in case there are people reading this who have bad intentions..... but I'll hope for the best... If you're a truck driver who needs to cut bolt-seals regularly, then you should buy this plus an extra battery. It's so easy to slap on a battery to this cutoff grinder, & in less than 5 seconds, the bolt is cut. A side benefit is that the top of the bolt doesn't fly off like when using standard bolt-cutters. This helps when the dock agent asks you to show them both pieces of the seal. It fits in the sidebox of my truck much easier than a pair of 3 foot long cutters, & I don't have to worry about keeping them sharp, or rusting. The cutting wheel on this lasts me over 6 months of use before I have to change it out, which takes only a minute or two. By the way, the battery lasts me about a week before I have to recharge it. Like I said, it's ten times easier to use than trying to hold a pair of 3 foot cutters, and using them in the dark, rain, etc. Just 5 seconds and presto, the seal is cut.
Customer
Reviewed in Canada on December 24, 2016
Works well but loses power fast an blade stalls out.
Robert Anderson
Reviewed in Canada on August 5, 2015
by far my favorite dewalt cordless! Not the most used dewalt cordless tool I have, but when I need it.....Oh yeah.!Working at elevations especially. No need for snagging up a 30' extension for a 5 second cut.If this one died today for any reason, I would have another by tomorrow.
Louis
Reviewed in the United States on May 26, 2015
5 stars for durability, but 4 stars for battery life.Using XRP packs with a mfr date of 2008, I could cut through about 24 linear inches of 1/8" x 1" angle on a single battery. If you are careful to avoid binding, you may get more per charge.I also purchased the grinder wheel and associated guard. It works, but the battery life is disappointing. I would use a corded unit for almost all grinding applications.Wire wheel performance was acceptable for short post-weld cleanup passes. You will only be disappointed if you try to use it for large surface prep applications.Bottom line: I would recommend it for short (couple of minutes or less) wire wheel or cutoff wheel jobs, but use as a grinder only when location prevents corded grinder operation.
marc
Reviewed in Canada on August 14, 2013
ONLY USED TWICE SO FAR BUT BOTH THOSE TIMES, I WAS HAPPY I HAD IT. HAD TO CUT A THICK PADLOCK OFF THE SHED (BROKE THE KEY INSIDE). THEN I CUT OFF SOME 3/4 INCH ANCHOR BOLTS STICKING OUT. WENT THROUGH IT LIKE AN ELECTRIC ONE WOULD. CAN'T SAY MUCH ABOUT BATTERY LIFE YET BUT IT SEEMS POWERFUL ENOUGH TO HANDLE MOST JOBS YOU THROW AT IT. BARE TOOLS IS THE WAY GO.
frank q
Reviewed in Canada on June 29, 2013
I've used the tool several times since I've purchased it. No problems or hic-ups.I use it out in the "field" where extension cords and power can be an issue.Medium duty steel cutting and grinding tasks are being done.I had concerns that it would not perform as well as a corded machine. Should of bought it sooner.
Michael S. Stepien
Reviewed in the United States on October 25, 2012
I first got one of these tools as part of a multi-tool kit and thought it would see very little use. I was way wrong! I use the tool almost every day in my job as a carpenter. It's great for cutting metal, but I've probably used it most cutting through stucco. That's rough duty for any tool, and this cut-off tool has performed remarkably well. I recently ordered this tool as a replacement for one that I had for years. It met a fatal demise when I dropped it on concrete off a 32 foot ladder.I was pleased to see that this newer version of the tool has an upgraded chuck locking mechanism identical to the corded DeWalt cut off tool.I have a rotation of 5 Lithium-Ion 18v batteries and have found that, with continuous use of the tool, one charger can stay ahead of it... even when doing power demanding tasks such as cutting stucco with a diamond blade. You'd need a bushel of Ni-cads to keep with it, so if you buy it with batteries, definitely get the Lithium-Ions.This tool is versatile and is a real work horse for a battery operated tool.
Recommended Products
