Your cart is empty.
Your cart is empty.Product Description
Convenient to Carry
The DEWINNER hammer lug crimper is only 3 1/2" tall and can easily be stored in any size toolbox, tool bag or even pocket.
Wide Application
Hammer crimper perfect for crimping battery cables, welding cables, and any other wire crimps for your automotive cable lugs, inverters, larger ring terminals, audio system power cables, small ring terminals, power cable terminal ends, insulated battery terminal.
How to Use Crimper
Step 1
Adjust Crimping Ram Head according Wire and Terminal Size.
Step 2
Place stripped wire in terminal.
Step 3
Place terminal and wire in jaw of crimper.
Step 4
With crimper on solid surface, strike crimp ram with hammer 4-5 times.
Compression Spring Design
Spring elasticity acts on the crimp port to keep the port in contact with the terminal at all times for ease of operation.
Suitable Wire Gauge
Fits cable sizes 8 AWG, 6 AWG, 4 AWG, 2 AWG, 1 AWG, and 1/0, 2/0, 3/0, 4/0.
Cable after Crimping
Metal press is forged with a unique cross- section design that ensure a tight crimp to get perfect and solid crimp terminations and ensure electrical safety.
Ramon S.
Reviewed in Canada on February 5, 2025
Easy to use. Must have on thicker wires
USER1234
Reviewed in Canada on January 8, 2025
Did a good job with 2/0 wire. I will see if more crimps reduce how well the tool works.
Customer
Reviewed in Canada on January 17, 2025
It's kinda cheap but it works good enough for me.
simon
Reviewed in the United Kingdom on September 8, 2024
Wasn't expecting much for the money, and when it arrives it's so dinky. However, paired with a 5lb lump hammer, setting terminal lugs on 10mm² and 16mm² cable was a breeze. 2 good whacks and its done. Didn't even bother to bolt it down. Highly recommended.
Fast289back
Reviewed in Canada on August 8, 2024
Used it today for the first time. Was repairing cable ends for electric golf carts. Was easy to use and worked quite well to secure the new ends.
S.D.
Reviewed in Canada on May 18, 2024
Simple to use...definitely need to attach to bench or work area when using...i screwed to a 2x4 pc of wood and clamp to bench when needed. Beats the old hammer and pin punch method.
Ray M.
Reviewed in the United Kingdom on October 8, 2024
Very useful for securing large crimp terminals. Works well, easy to use and robust. Not too expensive either.
Customer
Reviewed in Canada on October 4, 2024
handy tool, works well, make sure to anchor it down to your bench before you use it
Customer
Reviewed in Canada on October 3, 2024
Used it to crimp some 2-0 gauge battery cables on a semi truck, worked great
aw bowen
Reviewed in the United Kingdom on October 29, 2024
Dusent take up much room in the tool box.
Koop
Reviewed in Canada on September 28, 2023
Cheaper quality than expected, works tho.
JP
Reviewed in the United States on June 19, 2023
I have a large hydraulic crimper in my shop; however, I sometimes need to make repairs in the field and have been using the pliers and hammer method - not pretty and not the best crimp. I tested this with a supplied terminal on a section of 2 AWG wire - it works surprising well. One hard hit from a small sledge and it is done - put some heat shrink on and it looks factory. I mounted this to a section of steel angle iron, so I can clamp the one edge in my vise on the truck, and store it away when not in use. With just a supply of heat shrink and assorted terminals I can now make or repair cables in the field easily without excess or bulky equipment.
Robert
Reviewed in the United States on December 1, 2023
This tool is simple and it works perfectly. Use a 3lb hammer and you are set.
Recommended Products
CA $25.98
CA $ 12 .99 CA $12.99
CA $84.74
CA $ 37 .99 CA $37.99