Your cart is empty.
Your cart is empty. Cable entry gland is an ideal solution for cable entry through roofs. Made from ABS plastic, this waterproof and UV-resistant housing allows an easy cable entry solution for any condition.
Cable Gland Diameter Range: 3mm to 12mm
IP Rating: IP68
Material: UV resistant ABS
Color: Black
Package Included:
1 x ABS cable sealing boxes
2 x 3 -12mm rubber seals
1 x 1.5cm 3M double-sided tape
Some random IT guy
Reviewed in the United States on March 16, 2025
Worked great. Added screws and skipped the tape. I used black siliconized sealant instead.
John Sanderson
Reviewed in Canada on August 31, 2024
Used it to route the wire to an emergency light bar through my roof. The plastic seems a little thin but time will tell. The flange is plenty wide and allowed for a strip of mounting tape and then a good bead of sealant.
Carl ferland
Reviewed in Canada on June 24, 2023
perfect fit !
Mo
Reviewed in the United States on May 31, 2023
I used these to put solar cables from renogy panels on my trailer roof. They were a perfect fit and don't leak.
Zoomie
Reviewed in the United States on April 9, 2023
Easy to install using supplied double-sided adhesive tape and screw holes. Had to buy self-tapping metal screws for RV's fiberglass roof. (Screws not included most likely because not all applications use the same screws.) Added a tiny bit of RTV sealant at adhesive tape gaps. Best news is that the housing works, seals, looks good on the motorhome roof (can't see it from the ground!), and was easy to install. Used heat shrink tubing to weatherproof the coax cable's RG6 connector to our WeBoost cellular antenna. Aligned the housing with the direction of forward motion to somewhat shield the housing's cable entry from airborne debris/sand, rain, and wind.
Recommended Products
