Your cart is empty.
Your cart is empty.Product Description
FEATURES
- Charging 3-stage: constant current ( MPPT), constant voltage(Absorption Voltage), floating charge
- Selectable battery type Vented / Sealed / Gel / NiCd / Lithium battery (default is Sealed) (defined voltage for other battery by user)
- Soft start time ≤1S, Dynamic response and recovery time 100us
- Max efficiency ≥98.1%, PV utilization ≥99%
- In order to reduce the cost of electricity caused by high current, PV and battery each have two terminals
- MULTIPLE ELECTRONIC PROTECTIONS
- Short-Circuting / Reverse-Current
- Overcharging / Overload / Over-discharging
- Reverse polarity protection
COPPER COILS
- True MPPT controller, The Three copper coils play a step-down roles to make your system work more stable.
TRANSFORMER
- Three Electronic transformer, more safe
Iutput specification Overcharging protection voltage:
- 12V system (15V) / 24V system (30V);
- 36V system (45V) / 48V system (60V);
FAN COOLING
- Good Heat Gissipation
- Intelligence Fan-on temperature >45℃ and off < 40℃ , let your controller feel cooling.
- Fan use BEARING technologies increase life UP TO 5000hrs in normal use.
PORTS DESIGN
- we consider that the larger diameter of the wire will be greater cost for customers, so we designed two connectors for each pos and negs on solar and batteries connectors
- copper wires: 9AWG / air circuit: 63A
Positive Ground 50A MPPT Charge Controller
- System voltage: 12V / 24V / 36V / 48VDC Auto
- Rated charge current: 60A / discharge current: 6A
- Max Input Power: DC20V ~ DC80V (12V) / DC37V ~ DC105V (24V) / DC50V ~ DC160V (36V) / DC72V ~ DC160V (48V)
- The maximum PV input voltage (Voc): DC190V (The controller can’t work at this voltage of long duration that will break controller. Please refer to Input voltage from PV ).
Max PV Input Power
The maximum PV input power (The total power rated of PV can’t be over this watt that will break the controller ).
- 12V system (600W) / 24V system (1200W);
- 36V system (1800W) / 48V system (2200W);
- Battery System Voltage:
DC9V~DC15V (12V) / DC18V~DC30V (24V) / DC32V~DC40V (36 V) / DC42V~DC60V (48V)
Package including:
- 1 X MPPT 60A Charge Controller
- 1 X English Manual
- 4 X Mountings
TIPs
- Always connect battery first!!! Make sure enough batteries’ voltage let controller recognize the right system voltage. The disassembly sequence is contrary to the wiring order.
- DO NOT connect any Inverter/ wind/ Alternator or Charger into the charge controller! connect the Inverter directly to the battery.
- Ensures solar input voltage higher 3V or more than batteries’ voltage and total input power in the range. if input power is too low for max input power, it may be appears to have been discontinued., the charging current almost be zero when controller is floating charge.
- Parameter Setting Rules：Floating voltage > Low voltage reconnect > Low voltage discharge.
- The solar controller will stop output when the battery under 10.7V. The LCD will be blank when the battery under 8V and it will re-output when the battery up to the 12.6V (adjustable).
- Install the Charger controller to the battery as close as possible. Tighten the wire.
- When controller makes buzzing sound because of It's working hard to dissipate heat for your controller. Rest your heart, it will be stop when temperature return to normal.
- Remove all the debris around the controller ( leaving a space of approx. 5.91in ).
- Notes: The output terminal is for lamp only (12V system less 60W, 24V/36V/48V system less 100W ), and it will be burnt if connecting to other loads. The output for battery is no polarity reverse protection.
yan
Reviewed in Canada on March 23, 2025
Facile a utiliser
Brett Anderson
Reviewed in Canada on June 21, 2024
Good product lacks some features and stability
Gavin H
Reviewed in Canada on May 10, 2024
I have had two other mppt units from a well known supplier both of which failed miserably in a very short time and truthfully never did seem to mark as promised. This unit works great and has kept my system fully charged since being hooked up with zero issues. It has only been a few weeks but I expect to buy another for a separate system. Very happy with my choice.
David Bergeron
Reviewed in Canada on December 21, 2024
Good till it stop, prepare a backup
Grain
Reviewed in Canada on January 7, 2024
We had the system hooked up 8 months ago. We kept getting overcharging errors. Backed the voltage down in the settings as factory settings are way too high. Worked great for a few months. Then this week we got fault 4 reading on inverter which is low voltage. Batteries then drained completely and co.plete system would not come on. Solar charge controller turned off and refused to come back on. Checked wiring and all was good. Checked everything. The problem is the solar charge controller is broken. Do not buy. This is not a good product. Replacing with k own brand
Alex
Reviewed in Canada on August 29, 2023
I am so glad I read these reviews first. Even though they claim multiple times(even in the manual) that they are preset to not be Li-Ion batteries, all three of mine were.I have three pairs of 300watt panels going to three of these controllers.. One pair each which should give them 50amp each.After setting them all up I get "fault 18" low PV voltage. Might just be cause it's night time.I do wish there was a way to turn off the lcd screen.
Donald Rogers
Reviewed in Canada on April 13, 2023
48 volts is perfect.
Rick P.
Reviewed in Canada on July 20, 2021
Works well with a 48v battery configuration and the following panel configurations I have tried so far:1. 4 panels connected in series with a resulting 130v - 140v and 8.4 amps.2. 6 panels divided into 2 groups of 3 panels each. Groups connected in parallel. Panels within a group are connected in series. This configuration produces between 90v and 100v and about 17 amps of current.Good price and excellent product.
Recommended Products