Your cart is empty.
Your cart is empty.Product Description
30A Charger Controller Product Parameters
- Battery voltage: 12V/24V
- Charge current: 30A; Discharge current :10A
- Max Solar input: <50V; Discharge reconnect: 12.6V
- Charge voltage: 13.7V; Discharge stop: 10.7V
- USB output: 5V/2.5A (max)
- Self-consume: <15mA
- Operating temperature: -20~+60 ℃
- Size/Weight: 138*85*30mm /150g
- Install hole size: 124*50mm
30A Charger Controller Product Advantages
- Build-in industrial micro controller.
- Big LCD display, Dual USB output
- Fully PWM charge management.
- Build-in short-circuit protection,open-circuit protection,reverse protection,over-load protection.
- Dual mosfet Reverse current protection ,low heat production.
- Supports lead-acid batteries, gel batteries and lithium phosphate batteries.
How to install it?
1. Connect the battery
2. Connect solar panels
3. Connected load
4. Form a complete system
marco savard
Reviewed in Canada on March 9, 2025
Bonjour, j'avais un petit pépin. Avec le miens tout est réglé.Le service de communication est excellent et les produits eco worthy j'ai tout le système extérieur et les panneaux
David Kumka
Reviewed in Canada on March 31, 2025
Product (40A MPPT) worked well for 6 months and then the digital OLED display quit working.
C&R
Reviewed in the United States on March 3, 2025
Arrived on time with no visible shipping damage.Will be installed in a dark area. Hooked it up yesterday found that the back light doesn't work out of the box.
Josh Knarr
Reviewed in the United States on March 24, 2025
It's really hard to beat at the price point. Sure it's not MPPT, but if your array voltage matches your battery voltage (12v for parallel or 24v+ for series) and you're making a smaller system then you're fine. The trick with this solar charger is to match the panel output voltage (12v, 24v, etc) with the battery bank voltage.The connectors it comes with are suitable for 10ga standard sized solar wiring. However, the clamps from the controller to the battery are also 10ga sized. If you're using the "load" side of this charge controller for anything significant, these won't be enough. I wouldn't drive a 3000w inverter off the load side. It would have been nice to see some posts on this thing for the battery connectors which would make me feel a bit better but this controller is suitable for charging. Don't put anything beefier than a car accessory plug on the load side.Out of the box, the display is fine. The manual is decent. It comes with clamp down terminals enough for all the screw down posts. These are crimp type, so you should pick up a crimp tool to use them, along with some heat shrink to dress up the connections. I didn't have any problems crimping them down.The 12v/24v says that it's "auto" but in my case, but the manual says how to change it. The 12v setting was fine for me. There's also setting for charging on a schedule, etc, but honestly you just want the thing "on" when the panels are "on". The default is perfectly fine for this. Selecting the battery should be done by the user, using LI for Lifepo4 batteries. Another nice feature is being able to set the battery voltage levels for things like charging and floating.The positive pole on this is the ground and has a common pole. This means that the system is a positive ground system. Radio operators be aware.There is no bluetooth connectivity which would be nice to have. Build quality is nice except for the plastic buttons which feel incredibly cheap. However given that the system is really set-it-and-forget-it, this is hardly a deal breaker.
great scott
Reviewed in the United States on March 1, 2025
Junk quit working after 3 days of use, had to add a fan blowing on it to keep it from overheating, DO NOT BUY!!!
randy l moss
Reviewed in the United States on August 7, 2024
I like the bigger size terminals way more user friendly ,I am using this for a solar system, and it is working great, well worth the extra $10.00 for 60 amp capacity and ease of installation of wire.
Barry McIvor
Reviewed in Canada on August 29, 2024
For solar panel with my motorhome. Good sturdy, well built. Had some trouble understanding how to get to a certain area on monitor.
Jan
Reviewed in Canada on July 22, 2024
Solar charge controller works exactly as described. The convenient digital display shows your battery level so you can monitor your energy consumption. 30A is more than enough for upto 400w panels. We've got one still running for 6 years and bought a 2nd one as backup part.
larry hatcher
Reviewed in the United States on June 28, 2024
It is still working
Dan
Reviewed in Canada on May 24, 2024
Easy to wire up, like virtually any other charge controller, the wire connections in the bottom are clearly marked. Loosen the screw, insert the wire, tighten the screw -shrug-. Once it's running I scrolled through the menu to set it up for LiFePO4 (default is lead-acid) batteries. That's all there is to it.The LED display is always lit, as are the LED indication lights for charging and battery presence. The display goes dim after a short period of time, is lit fully by pressing the only button on the interface, which makes reading the values clear & easy. Normal display feeds back panel voltage, battery voltage, charging current, and charging watts.I feed a 12V LiFePO4 bank from 250W of solar panels, with it. The default LiFePO4 profile charges the pack to 14.4V where it cuts out, but this can apparently be altered, if you have spacial battery needs - I haven't bothered, this profile works well with my "standard" battery pack.I don't produce enough current to warrant concern, my photovoltaic system maxes out around 150W, but the side of the controller box says it can get hot to the touch, I guess if you are pushing the 40A max.
Ron Green
Reviewed in Canada on December 28, 2024
As ordered
Stef
Reviewed in Canada on October 23, 2024
Build solid, steel, easy to configure perfect I will recommend
John L.
Reviewed in Canada on October 19, 2024
Using this charge controller for a small solar project. I had an issue with the charge controller not functioning as it should, but after contacting ECO-WORTHY for product support, they were able to resolve the issue for me in a very timely manner
Recommended Products
$64.15
$ 30 .95 $30.95