Your cart is empty.
Your cart is empty.Product Description
Have you ever found yourself in such a situation ?
It is difficult to remove the model and damage the model.
Uneven platforms, make you unable to print normally.
Each time with glue, poor adhesion, always curl.
Official products, improve the quality of the model.
High viscosity and strong adhesion
There are high viscosity, no warping, and fine surface, no need to use texture paper and solid glue.
composite nano molecule coating has high viscosity after heating, which makes the model have strong adhesion.
Recovery model with 0.15MM of flatness
The flatness of the printing platform is 0.15MM to avoid leveling failure. There is an exquisite bottom of the model.
this is the combination of glass and composite. Due to the flatness of glass and the uniform composite coating of surface "lattice", the platform has excellent flatness.
High hardness and durable
There are wear-resistant and scratch-resistant.
this is the combination of chemically tempered glass and surface composite coating. The inorganic coating is covered. The hardness can be up to 8 Mohs, the hardness is better than aluminum and copper. it can resistant to 400℃ and use repeatedly without reducing performance.
Easy to clean
After you have used for several times, the platform can be clean by using alcohol or acetone.
there is a protective film on the surface of the composite coating, which is of anti-scratch and dustproof, etc
AxMn
Reviewed in Canada on February 28, 2025
I love the flat surface for the bottom of my prints on my old Ender 3 workhorse, but I do have issues with removal of larger parts, coming from using primarily PEI sheets, not having the ability to simply bend and crack them off just seems overly difficult.Certainly a specific use case item, not for every print, but what it does, it does well.
Serge Calmettes
Reviewed in Canada on February 21, 2025
the printed parts stick to the glass bed so well that they are nearly impossible to remove without breaking them.
石田 皓
Reviewed in Japan on September 7, 2024
PEIシートの密着性がなくなり設定でも改善できなかったため購入しました。写真左がガラスベッド初回印刷物、右が密着性がなくなったらPEIシートです。印刷機体"Ender3V3SE"
darrin haskell
Reviewed in Canada on September 5, 2024
Great print bed with great adhesion and goood quality! No issues at all and would highly recommend!
Mathiew
Reviewed in Canada on March 24, 2024
I was told by a fellow 3d printing neighbor that a glass bed is perfect for 3d printing. He told me the trick to having it release is to let the plate cool, but with PETG it stuck WAY to good and even after letting it cool down to room temperature, I had a hard time getting my print off the plate and unfortunately my plate has a surface chip in it now after 1 use. It works really good with PLA mind you. I found a glass bed on an auction site from the brand COMGROW that works really great with PETG so now my creality is designated to JUST PLA and TPU filament.
Marco
Reviewed in Canada on March 17, 2024
I almost never put a comment, but I have to. I thought it would be an identical replacement for my Ender 3 v2 Neo plate, cause mine broke.. It is way better, I see how this one can't break like the original, prints get of a lot more easier, leaves a nicer finish on the bottom. It's just better for kinda cheap lol
Pablo A.
Reviewed in Spain on December 10, 2024
Lo compré porque la base que venía con mi Ender3 se acabó combando y tenía problemas de inyección. Por lo que cambié a esta cama de cristal. Desde entonces las impresiones salen perfectas.El único inconveniente con el que te puedes topar es que las piezas con poca altura y mucha superficie de base cuesta un poco despegarlas. Pero eso según para qué pieza también puede ser una ventaja.Recomendado.
😎 dude
Reviewed in the United Kingdom on December 10, 2024
Great item. you will need to re calibrate your nozzle height before using and better get some prit stick too.
Francesco Rizzo
Reviewed in Italy on November 29, 2024
Ottimo piatto, ho preso questo in vetro, da affiancare al mio classico PEI poiché è risaputo come i bed standard delle stampanti arrivino spesso non perfettamente planari, quando ho bisogno di assoluta planaritá per componenti magari più grandi, utilizzo questo piatto.Attenzione però perché l’aderenza è veramente spaventosa, rimuovere i componenti alcune volte è veramente difficile.
Darrell L.
Reviewed in Canada on November 24, 2024
Couldn't really get any prints to stick to it however I did eventually use it on my Creality K1in order to "stiffen" the heated bed surface. Now my K1 has a level build plate.Will buy more in order to flatten all of my Creality "warped" print beds.
BlindedByTheDarkness
Reviewed in Canada on October 23, 2024
My first pei bed. Love it! I got it for printing petg which I havnt had a chance to do yet but the little bit of Pla I printed worked well. Magnet is strong as hell.
Jake
Reviewed in Canada on January 21, 2024
An improvement over the stock Ender bed. At first I had issues with adhesion and getting PLA to stick... I found that if I clean the bed with rubbing alcohol every time, and give the bed a full 5 minutes to warm up (the glass takes longer) that most of my adhesion issues went away. The prints are also extremely hard to remove from the glass bed because you can't flex it anymore to pop the print off... just put the whole bed and print into the fridge for 10 minutes and the print comes right off.
Hiram
Reviewed in Mexico on July 7, 2023
Llego en empaque de Creality, para ser un simple plato de cristal templado se ve y se siente de calidad, bien hecho y bien pensado. La adherencia en las impresiones es buena, con las configuraciones de impresión adecuadas claro. Vale la pena.
Recommended Products