Your cart is empty.
Your cart is empty.HETYY 125 KHz handheld rfid copier for ID IC and AWID
Jorge G. Hidalgo Gonzalez
Reviewed in the United States on March 8, 2025
This is a piece of junk. You must start with an already coded EMID/HID; you have no way of knowing the code. Your are working blind here. All this gadget does is read a previously coded EMID/HID and duplicate the code into a programmable EMID/HID. This gadget is just a copier; it does not program. You cannot set the codes. The word “writer” is not accurate, since you cannot write the codes—only duplicates an existing one
hugo
Reviewed in Canada on March 6, 2025
works great, delivered quickly and very cheap. would definitely recommend
Sebastian
Reviewed in Canada on March 4, 2025
I was unsure after reading other reviews but it worked like a charm for my apartment RFID key! Will definitely be using it to make several copies for friends too.
Janet Torres
Reviewed in the United States on March 30, 2025
So great and easy to use. Just follow instructions
Good and fast delivery..
Reviewed in Canada on March 25, 2025
Not working
Sarah Mcclure
Reviewed in the United States on March 21, 2025
Easy to use works great. Used to create spares for an apartment Fob that would cost me $100 to replace with management.
Christina
Reviewed in Canada on March 10, 2025
I don't normally leave reviews, but this was super easy to use and copied the tag in less than 10 seconds. The copied tags work seamlessly!
Zach
Reviewed in the United States on February 18, 2025
Does not work at all. Only “reads” the tags that come with it. I’m going to take it apart, but I’m assuming it’s simple electronics that react to magnets.
Jennifer
Reviewed in Canada on January 8, 2025
So the worst part is that i cant tell if the fob works since i had so many hits and misses. The led alone i dont think are enough, i had to buy a second reader just to see if it worked so i wouldnt keep going to the condo with non working fobs and not get in. I only tested this on AWID 125hz cards. For a some extra money buy the visual one XEXE7
Michael
Reviewed in the United States on January 29, 2025
TLDR: works but only if it’s the right frequencyAs long as the key you’re trying to copy is the right frequency, it works great! To hopefully save you some time, if it’s a flat card you’re trying to copy, shine a light through it, if it looks like a coil going to the edges of the card this probably won’t work, if it looks like a straight rod, it may. For fobs, you can download an app like NFC TagInfo by NXP to your phone and hold the fob next to your phone. If your phone detects it at all, it’s probably the wrong frequency, if the phone doesn’t find it, good chance it’ll work with this copier. That’s at least what I read online and it held true for me. I tested a flat ID card with the “coil” inside and it didn’t work, but when I used my apartment key fob (which the app couldn’t detect), the copier worked great. Now I have a spare fob, as well as copies for my boyfriend and parents!Oh! Forgot to mention, I also read it probably won’t work on the flat stickers you put on your windshield that some apartment gates use for entry (they have coils similar to the IDs imbedded in them). Again, none of this is 100%, but I did a little research before buying because of the mixed reviews, so hoping to save you some time! :)
Recommended Products
