Your cart is empty.
Your cart is empty.Rawlplug Sanitary Fixing Kit suitable for fixing WC or bidets into solid base materials. The kit can be used without the expansion plugs to fix into timber floor. Nylon bushes and caps are supplied to protect the ceramic when tightening the screws. Kit includes: 2 x 14x70mm plugs, 2 x 10x140mm screws, 2 x flange bushes, 2 x nuts
Facilities
Reviewed in Canada on March 25, 2025
Great
eeone
Reviewed in the United Kingdom on February 27, 2025
Good plugs for the wall, screwed in solidly to the required depth and holds the basin solidly, though the nuts needed to be re-tightened after a few days, presumably as the nylon bushes deform slightly under load. I like the fact there are two methods of screwing into the wall plugs, either use a Torx bit or a spanner on the central squared off section. The nylon bushes work perfectly to level the basin horizontally.
Philip
Reviewed in the United Kingdom on November 8, 2024
I was replacing my sink and wanted to have one that was not attached to the floor.I got a heavy sink from Amazon and was sceptical that it would hold. One month in and I have had zero issues!Quality product and a great price. Highly recommended.
Anthony Carter
Reviewed in the United Kingdom on October 24, 2022
Very good easy and less than half the price of going to plumbers merchants
xxale77
Reviewed in the United Kingdom on October 21, 2017
Excellent. Works perfectly. 14mm wall plug of great quality. Best value pack out there by far!
Romaniana
Reviewed in the United Kingdom on May 4, 2015
These worked well but mine did not come with the nut covers which you would need for a bidet fixing where they may be in view.. I used them to fix a basin so the fixings are not in view. Good quality
Recommended Products
