Your cart is empty.
Your cart is empty.Product Description
Specifications
- the double x stand
Folded Size : 39" x 13"
Unfolded Size : width 11.8"- 32.2" ; height 24.0" -38.5" (5 different playing heights)
- the second tied stand
W x H : 12.6" x 12.6"
Length : Ajustable from 16.1"-30.0"
Weight:
- the double x stand： 2.7kg
- the second tied stand : 1.0 kg
Candi
Reviewed in Canada on February 6, 2025
I was surprised at the quality, I’ve paid more for less, seems sturdy enough, I’dbuy another if I needed it :)
Donald - Burnaby
Reviewed in Canada on March 4, 2024
This stand is solid. I haven't used the upper tier, but the lower one is verry strong. It's also heavier than I thought it would be, so not so not so portable, but good. There was some slight damage to one of the rubber ends due to poor packaging, but still very worth the price.
Alex Key
Reviewed in Canada on May 8, 2023
Great stand for the price. The upper arms have some play because the lower pipe diameter is a bit too small for the clamp but I added 1-1/2 turn of electric tape on the pipe and it now sits great, so not a big issue.The bottom part is really heavy duty design even if bottom bars are not too long.
Daniel Humphreys
Reviewed in Canada on May 23, 2023
Let's start positive. The 1st tier, and base for this stand is of good quality. If you just have one synthesizer/keybord this is great for the price.The 2nd tier though? Garbage. At least the one I received was. I tightened the tighteners so tight that I can't even loosen one of them anymore and it is still very loose and sliding all over the place and making the second tier overall very wobbly. I wouldn't put any instruments on the second tier that are even remotely valuable.As for the customer service. After realizing the second tier wasn't for me, I ordered a different product and tried to return this one. We have been having a back and forth for two days now. They refuse to refund me until I can send them a picture of the issue......Yeah let me just send you a picture of something wobbling lol. Can't send in videos either. Still haven't refunded me and still going back and forth. The furthest i've gotten so far is that they will refund me the item if I pay for all shipping costs. Don't even get me started on the fact the box was half destroyed when it showed up.I've attached a (useless) picture of the stand wobbling that I sent them since they wanted a picture so bad. Also a picture showing I couldn't tighten any further lol Let's see if this review helps get me my refund.
Mr Bill
Reviewed in Canada on September 21, 2022
Most of the other comments for this are correct. Here are the key points- Just as stable as my Hercules KS210B- Locking mechanism is better than on Hercules KS210B- Dual cross bar design is strong and stable- 2nd tier is easy to install and is strong due to the cross bar- It is true that the rubber tube ends are behind where the 2nd tier clamps; so they can not lift the keyboard like the rubber tube ends on the front. A solution: Some rubber wrapped around the tube and electrical tape could be used to make a nice cushion to lift the main keyboard's back.- The clamps that hold the tier to the main frame do not tighten enough. Some electrical tape around this area before fitting the tier will take up slack and increase clamping force.A real bargain.... don't buy them all I want a few more!!!! :)
S. Ogloff
Reviewed in Canada on September 2, 2022
You may have to move the rod around inside the second tier risers to get the rod completely through and screwed in. Otherwise it's a great stand so far for my Novation Launchkey 49 MKII on top and a KORG X50 on bottom. The only problem I have with it is you can't adjust the height.
Customer
Reviewed in Canada on December 4, 2018
The keyboard stand is very firm and can hold very heavy keyboards. Mounted two heavy keyboards on it for a program and it was so solid and nice to have. You don't have a lot of options with the tilt but can't complain with the price. Recommend this for the price.
RickC
Reviewed in Canada on February 17, 2017
Pros: Lightweight, easily adjustable X-stand. I'm using it for a home studio so especially like how lowest setting which puts the first keyboard on par with my other stand, a Qlock pro. Arrived much faster than I thought it would and with a pro courier that took a signature.It is sturdy enough - I would not stack a pair 80 lb stage pianos on this, but supports my two controlers. Great price. All said, the X main stand itself is an excellent bargain, but strongly suggest buying it without the top tier - (see below)Cons: The second tier was unusable - the brace is too short to reach the other side when the main X-stand is fully extended in it's lowest postion. The 2nd tier DOES NOT TILT or adjust in any way. It is too high for sensible use with a keyboard. The tier is rather flimsy with iffy attachement. to the main. The rubber retainer at the ends are so loose they serve no function retaining any equipment - they pop out if you even blow on it. Very poor design and a match that rendered the top tier useless!. Oddly, it costs more than the host-x-stand which is a fairly good stand
Recommended Products
$19.83
$ 10 .07 $10.07
$126.59
$ 62 .63 $62.63
$20.81
$ 10 .07 $10.07