Your cart is empty.
Your cart is empty.Product Description
Flexible 3 outlets temperature controller with timer
3 outlet timer & temperature controller
Outlet 1 and outlet 2 are timer thermostat outlets. Time and temperature can be controlled.
Outlet 3 is the timer outlet.
Socket with time control to manage your aquarium or reptile terrariums to control your ceramic heat lamps, heat mat, UVA lamps, UVB lamps, incubators, fans, A/C, heat sink, blower, and heater to simulate the natural environment.
Outlet 1 can connect to the heat mat to manage the temp.
Outlet 2 can connect to a ceramic heat lamp or a fan.
Outlet 3 can connect a UVA/UVB lamp to control the duration of lights.
Multi-Function Timer Thermostat
- Two probes can support the cooling or heating of socket 1 and socket 2.
- ON -- OFF, keep a proper temperature range.
Reptile-friendly design
Raising snakes, lizards, ball pythons, chameleons, corn snakes, tortoises, bearded dragons, and frogs need a controller like this, which can customize the time and temperature of your pet, control the lighting time, control the temperature, and scientifically raise reptiles.
Dual Probes-Waterproof temperature sensor
Dual Probes make two timer temperature outlets that can work individually separately, each supporting heating & cooling.
With two waterproof temperature sensors, you can set different temps to control different areas, such as with 2 heat lamps/mats for 2 different zones or 2 different kinds of tanks. Applications are more flexible.
Professional design for reptiles
Features of this reptiles timer thermostat
- Large LCD screen
- Power-off memory function, the setting will be saved.
- Display the sensed temperature, setting temperature, and custom icons on the display to indicate working mode, glare-free and eye protected.
- Support reading with Centigrade or Fahrenheit unit.
- Easy to use, plug-and-play design.
- With a temperature correction function.
- Allow users to adjust measuring accuracy based on different probes, etc.
- High and low-temperature alarms are available.
Widely application
Application objects and devices
- Aquarium or reptile terrariums to control your ceramic heat lamps, heat mat, UVA lamps, UVB lamps, incubators, fans, A/C, heat sink, blower, and heater.
- For reptile raising or incubation, such as fogs, birds, snakes, chicks, lizards, ball pythons, chameleons, tortoises, and bearded dragons.
- For plant growing and nursery, home brewing, greenhouse, mushroom growing, etc.
Packaging includes:
1 x TTC1003 Temperature Controller
2 x Temperature sensor
1 x Manual
CHBacon
Reviewed in the United States on March 30, 2025
Durable, but difficult to Program.
PK
Reviewed in Canada on February 4, 2025
One for my corn snake and one for my ball python. Works very well with the timer, I have both set to turn the heating elements on during the day and off at night. It’s never failed. The only downfall is that it is a little complicated to set up I find (the temperature part) but there are YouTube tutorials available. I’d buy again.
Vanessa 🖤
Reviewed in Canada on January 15, 2025
Works to keep track of temperature and willShut off when too hot however, I can’t make the day night timer work. I have a UV plugged into it and I still have to manually turn on and off. Doesn’t work to its full ability. Still on the hunt for a product that will work with all of the things I need it for sadly.
Customer
Reviewed in Canada on March 21, 2024
It didn’t work from day 1. For whatever reason the outputs only turn off based on the programming but don’t turn back on unless you unplug and plug it in again. Pretty much useless.
Karli M.
Reviewed in Canada on March 20, 2024
Maintains target temp range well. Probes seem to be accurate and respond quickly to changes. Love the multiple plugs. Would love a unit with even more plugs for larger reptile collections. Overall great so far after about 1 month of running it for my new cal geckos.Edit: loved it so much I now have one for my geckos, and another 2 units for my snakes. Amazing and cheap compared to other options. Can run hot side, cold side temps + daytime lights. Easy to use if you’re familiar with thermostat setups. Love love love.
gina burdette
Reviewed in the United States on March 17, 2024
This item is made to regulate temperature for reptiles but I bought it to regulate the temperature in the greenhouse. I have two small heaters and with this am able to cut them off at a certain temperature and turn them on at different temperatures. Works great, although the instructions could be better. They are very vague.
peter
Reviewed in Canada on March 10, 2024
It works like a charm. I wish there was more plug like 4 instead of 3 but it's a good system.
J&E
Reviewed in Canada on October 5, 2024
So far so good!Thermostat working on-off on the set times and temperatures.Just a little confusing when looking at the probe and the outlet placement.
Aubrey Kaida
Reviewed in Canada on April 30, 2024
I bought these at the end of December in 2023. It's April 2024 and they already aren't working. They will still turn my lights on and off but every time I plug in any kind of heat source no matter what wattage it is, it either burns out the bulb immediately or it won't switch on the heat when it's below the temperature it's supposed to turn on at. Now neither of my reptiles have what they should've because I put my trust into something blindly. I've tried reaching out but have heard nothing, I'll be trying again.. but please be warned that this is possible as it happened with both that I purchased.
Joshua
Reviewed in the United States on September 17, 2023
At first this controller was very useful, I could set the two temperature probes to in the snake enclosure and near the undertank heating pad to monitor both temperatures simultaneously. After about a month of use, the first probe on the heating pad broke. By that I mean, it started to report temperatures from 72 to 135 degrees. The sensor inside the tank held steady at 85 so I was content to ignore that failure as everything seemed to be working. About two weeks later I was woken in the middle of the night by an alarm. The temperature in the tank had dropped to 75, despite no change in the controller.Using the manual and scrolling through the menus I was able to reset it, the limits on the sensor probe, and correct the PID loop for temperature control. It worked for about a day before I got another alarm saying that the inside tank temperature had hit 95 degrees. This was confirmed with a second probe and an IR thermometer. It would randomly turn on and off power to the heating element, sometimes supply power to the wrong outlet (I was only using one of the two) because the "sensor" triggered for the other probe.I bought a new one from another supplier and since there was no chance of return from the company I took it apart to find out what's wrong. The internal wiring is haphazard if I'm being generous. Solder connections are flimsy and oxidized, the chipsets used to make the electronics work are not compatible as in they have different voltage requirements and there's no converter to change, so one either runs above recommended voltage or the other runs below the minimum required.TL;DR This failed after a month and nearly caused significant harm to my pets. It is designed to fail and will cause harm if you're not vigilant.
Licensed Electrician Farmer
Reviewed in the United States on March 1, 2023
I rarely ever take time to leave a review, this product deserves some positive feedback. First let me say that I am an Electrical Contractor and HVAC controls Specialist.With that said, I am very critical of most temperatures control devices.This did take about 15 minutes to understand their programming process, but only because they made it extremely versatile. It even has an Audible Alarm Feature for Output 1 & 2 if you choose to set it up.This can control Heat and, or Cooling, if you use 1 output for heat and 1 for cool.I am using this for a Chicken Brooder, so I am using both for Heat and Output 3 for Lighting.I disabled the timers on Output 1 and 2 and Set the Temperature Range (On) @ 90°F, (Off) @ 95°F. I can control multiple Brooders using the Exact Same Setup. 1 Reptile Pad 16 Watt and 1 70 Watt Ceramic Heat Lamp per Brooder.Output 3 is Set to Provide LED Lighting to Simulate Sunlight.Check your devices and Do Not Exceed the Rated Amps.Easy Amperage Calculation:Watts÷Volts=Amps70W ÷ 120V = .58 AmpsDo not Exceed 10 Amps Total Combined
Carlos
Reviewed in the United States on December 24, 2023
We use it to run temperature control (one plug for the day light and the other for the night ceramic lamp) on a snake terrarium and to control the lights of the terrarium and 2 others lizard enclosures. It works super well. The probes are very accurate. I read reviews of people complaining that it’s hard to set up, but if you have any experience with timers you will figure it out pretty easily. Would 100% recommend. Cheaper and better than anything in the pet stores.
Becky
Reviewed in Canada on October 17, 2023
This is exactly what I needed. The dual temp probes and controls are perfect for running 2 vivariums with different settings.Easy to set up, and so far its accurate and working perfectly.
Recommended Products