Shopping Cart

Your cart is empty.

Your cart is empty.

Solar Charge Controller 30A 12V/24V Auto Solar Panel Battery Controller PWM Solar Regulator with Dual USB, LCD Display, Auto Parameter, Black

Free shipping on orders over $31.42

$12.06

$ 6 .03 $6.03

In Stock
  • 30A Solar Charge Controller: With the built-in industrial microcontroller, this PWM solar charge controller automatically helps you manage the working of solar panels and batteries in solar systems. You don't need to reset it when the battery runs out cause it will memorize various parameters set by the user
  • Widely Compatibility in Battery: Compatible with 12V and 24V systems, only suitable for lead-acid batteries, such as OPEN, AGM, and GEL. You can also charge your mobile phone, tablet, and PC through the Dual USB output 5V/1A (max). Note: When installing the controller for the first time, please ensure the battery is fully charged to recognize the battery type correctly
  • Safe to Use: Built-in over-current, short circuit protection, reverse connection protection and open circuit protection are all automatic recovery without damaging the controller. This solar charge controller will help you improve the system efficiency and prolong the battery life
  • Function LCD Display: Intuitive LCD screen can view various parameters and real-time understand data dynamics. The data is able to switch modes and parameter configuration, a good choice for use at home, industrial, commercial, etc
  • Important Installation Sequence: When installing, please install the battery first and then connect the solar panel. The disassembly sequence is contrary to the wiring order. Please connect the devices as the instruction manual shows or the system may be damaged by misuse


LCD Display/Setting

Easy to read the status and data with an LCD display, which is also able to switch modes and parameter configuration

Dual USB Ports

Long USB charging life, supports most USB port devices on the market. Dual USB output 5V/1A to charge your phone, tablet or PC

Form a complete system

For the first use, please ensure the battery has enough power so that this PWM charge controller can recognize the battery

30A Solar Charge Controller:


Specification

Rated Voltage: 12V/24V auto adapt

Charge Current: 30A

Discharge Current: 10A

Standby Current:

Operating temperature: -35~+60℃

USB output: 5V/1A


Package List:

1 x 30A Solar Charge Controller

1X English User Manual


Michael Singh
Reviewed in Canada on March 31, 2025
This is a standard pwm controller. You can pick these up almost anywhere and they get the job done although they're not entirely efficient. These will not be able to get the maximum out of your solar panels however if you're just looking for a small setup to charge a smaller battery without a lot of up front cost but this will do you well.I'm currently using this with a 50 watt panel to charge up a small 12 volt life4po battery. This controller can do multiple chemistries which is helpful.Be sure to read the instructions and hook this up to the battery first and I would recommend fuses on the inputs and the outputs
Nuff said
Reviewed in Canada on March 29, 2025
My only experience with solar power before this has been string lights and coop doors, but I have found this controller to be an asset when experimenting with a 100W solar panel.I’m able to see both the battery’s charge and any draw. Built in protection for over current and reverse current gives me the confidence to proceed as I learn without cooking anything too. The USB ports have been a big asset since I don’t have an inverter hooked up yet. I don’t find the controller all that intuitive, but it could also be due to my inexperience. Overall, this little controller is worth the money for the information it provides.
Recommended Products