rangerrick
Reviewed in Canada on August 1, 2024
These extension are great to get air in short or hard to get at valve stems. Well made.
Luc Thomas
Reviewed in Canada on June 19, 2024
This extender is pointless.. because as you try to remove it your tire loses its pressure.. The quality of the extender is good, but i put in 35psi into the scooter tire and then as i try to unwind the extender as fast as i can i lose 10 psi and im back to 25, back to where i started.. You need to just use a tire inflator that you push on, not one that you screw on.. for scooters..
Wolf
Reviewed in Canada on October 13, 2024
The connector for the valve stem is not hard connected to the rubber extension, therefore you have to screw the connector unto the valve stem directly. In my case, the valve stem is difficult to access, it is why I purchased the extension. I lose as much air getting the connector off of the valve stem as putting it on. The connector to the valve stem should be hard connected to the rubber extension to aid in screwing on the connector to the valve stem without losing any air.
mike
Reviewed in Canada on August 16, 2023
Works is exactly what is expected
PWag
Reviewed in Canada on October 8, 2023
These work great to extend the valve on a tire. Works as they should and are great quality.
Bunner100
Reviewed in Canada on April 30, 2023
Hope to use these as extensions to ease attaching to tires with limited space allowance within the rim on the lmvalve stems. The portable compressor I have has the quick latching feature which doesn't seem to fit well to get on and off the valve stem. Once these are screwed on other end can be attached to the compressor with the quick latching end.
Customer
Reviewed in Canada on August 23, 2022
Perform as expected. I would recommend these.
Paul Taylor
Reviewed in Canada on April 17, 2022
I needed an extension for my pump so that I could reach the stem on my scooter and motorcycle as they were hard to get to. These plug into my pump and are flexible enough to get into a tight space