Your cart is empty.
Your cart is empty.
-Specification-
SoC: Rockchip RK3588
CPU: Quad-core ARM Cortex-A76(up to 2.4GHz) and quad-core Cortex-A55 CPU (up to 1.8GHz)
GPU: Mali-G610 MP4, compatible with OpenGLES 1.1, 2.0, and 3.2, OpenCL up to 2.2 and Vulkan1.2
VPU: 8K@60fps H.265 and VP9 decoder, 8K@30fps H.264 decoder, 4K@60fps AV1 decoder, 8K@30fps H.264 and H.265 encoder
NPU: 6TOPs, supports INT4/INT8/INT16/FP16RAM: 64-bit 4GB/8GB/16GB LPDDR4X at 2133MHz
Flash: 0GB/64GB eMMC, at HS400 mode
1 x microSD interface, support up to SDR104 mode
1 x On-board PCIe 2.5G ethernet controller (RTL8125B)
USB:
2 x USB 3.1 Gen1 OTG which combo with DP display（up to 4Kp60）
1 x USB 3.1 Gen1 Host
2 x USB 2.0 Host
PCIe:
up to 4 x PCIe interfaces
2 x PCIe 2.1 x1 and 2 x PCIe 3.0 x2
or 2 x PCIe 2.1 x1 and 1 x PCIe 3.0 x4
or 1 x PCIe 2.1 x1, 1 x PCIe 3.0 x2, and 2 x PCIe 3.0 x1
or 4 x PCIe 3.0 x1HDMI output:
2 x HDMI outputs which is compatible with HDMI2.1, HDMI2.0, and HDMI1.4 operation
one support displays up to 7680x4320@60Hz, another one support up to 4Kp60
Support RGB/YUV(up to 10bit) formatHDMI input: 1 x HDMI input, up to 4Kp60
MIPI RX:
2 x 4lane MIPI DPHY CSI RX which support x4 mode or x2+x2 mode ,compatible with MIPI V1.2
2 x 4lane MIPI_D/CPHY_RXMIPI TX:
2 x 4-lane MIPI D-PHY/C-PHY Combo PHY TX, compatible with MIPI DPHY 2.0 or CPHY 1.1
-Technical Support-
Wiki:"".
Please click "WayPonDEV" and ask a question.
Please leave the message "wpd#youyeetoo&com (#--->@,&--->.)" or skype: monica_9122.
Customer
Reviewed in the United States on March 25, 2025
I recently purchased this board to explore a new hobby and experiment with clustering, and so far, I’m really impressed. It arrived quickly, and right out of the box, it’s significantly more powerful than my Raspberry Pi. Performance is smooth, and it’s even more compact than I expected, making it a great fit for my setup.One thing to note is that it does run a little warm, which is to be expected given its performance. If you plan to use it as a NAS that you frequently access, I highly recommend ordering a fan or two to help with cooling. Mine arrived fully assembled, with the command module already attached to the board and a heatsink pre-installed on top of the CPU.The only real challenge I faced was the OS installation, though I suspect that was more of a personal learning curve. The available guides can be a bit convoluted at times, and while the wiki offers some helpful insights, troubleshooting can be difficult due to the lack of community support—there just aren’t many forums discussing this board yet. If you’re new to this, I highly recommend installing the OS via an SD card, as it’s the easiest method. If you choose the USB-C to eMMc route you’ll be dealing with a lot of “extra”.Build quality is solid, and all the ports—HDMI, USB-A, and USB-C—fit snugly. While this ensures a secure connection, it can feel a bit tight at times, making me slightly wary of applying too much force. That said, I see this more as a personal concern rather than a flaw in the design.Overall, this board has exceeded my expectations. Despite the learning curve, it’s a powerful and compact option, and I highly recommend it for those looking to experiment with clusters or build a high-performance NAS.
Simitar
Reviewed in Germany on February 7, 2025
Noch 2 nvme 4TB Disks eingebaut und ein kleines Gehäuse mitbestelt und die Kiste rennt mit Debian.Benutze ihn im 7/24 Betrieb als Heimserver mit Samba Freigabe, Portainer Virtualisierung, und Jellyfin Mediaserver. Pihole und Adwareblock sowie ein Minecraftserver laufen auch noch.Der Server hängt mit 2.5GB Netzwerk direkt am 2.5GB Port der Fritzbox und bringt beim kopieren die vollen 2.5GB an Durchsatz - so muss das sein!Keine Geräusche, da nvme und keine Lüfter nötig, er wird nur Handwarm im Metalcase.Auf jedenfall eine super Alternative zu Fertig-NAS-Systemen oder lauten/großen Heimservern, die allesammt sehr viel Strom fressen.Allerdings braucht man etwas Debian und IT Kenntnisse, was man aber alles auch lernen und ergoogeln kann,
Client d'
Reviewed in Canada on January 3, 2025
downloaded software for a mini NAS , it's working now for 2 weeks and doesn't need a lot of electricity and very quiet , but can be expensive if you buy the 4T NVME.
GB
Reviewed in Canada on August 13, 2024
Board is in good shape and all pieces of the kit accounted for. Arrived on time 👍
Hans Johann Põlluste
Reviewed in Germany on December 16, 2024
Had a problem with IR reciever on the board. The seller quickly responded to the message and the problem was solved.
hedefalk
Reviewed in Sweden on November 24, 2024
Initially got a defective carrier board, but seller sent a new one in a timely manner.
Luis Ezcurdia
Reviewed in Mexico on October 28, 2024
Con OMV7 preinstalado esta listo para usarse. Es todo lo que puedes pedir para un NAS o un home server. Compre la versione 32 Gb de ram y aun no he logrado usar mas de 2 Gb, yo les recomendaría irse a la version de 16gb
Recommended Products
$1,227.60
$ 71 .28 $71.28