Your cart is empty.
Your cart is empty.Product Description
Adjustable power AIO camera transmitter with cloverleaf antenna
Description :
The AIO Camera combo is perfect for ultra micro drone. It is a combination of a FPV camera, a transmitter and an antenna.
It includes everything into a single unit no bigger than one dollar coin.
It’s compatible with branded FPV googles and monitors equipped with 5.8GHz receivers.
Installation is easy and can be done in seconds. No soldering or special skills are required.
All you need is to put it into your drone and power it by a 1S Lipo battery.
Needed To Complete with 1S Li-Po Battery and 5.8GHz FPV Headset or Monitor.
Easy to use plug and play
Features:
- Micro size, light weight.
- 40CH compatible with more types of RX.
- Plug and play, ready to fly, perfect for DIY.
- High image resolution, good image contour and perfect low illumination.
- Black PCB board prevent light-leaking, help to restore true color.
- Adjustable power 25mW/50mW/200mW, Long transmission range and less blink.
Micro size and light weight
Specification:
- Output power:0/25mW/50mW/200mW adjustable (Set output power on 0, to avoid frequency interference)
- Input power: 3.2–5.5V
- Current consumption:
- 250mA-510mA(25mW)
- 270mA-640mA(50mW)
- 330mA-740mA(200mW)
- Camera resolution: 600TVL
- Video system:NTSC
- Mini illumination: 1 lux
- Field of view: 120°FOV 150°DFOV
- Antenna dimensions: 22mm X 29mm diameter
- Antenna: cloverleaf antenna
- Frequency: 5.8GHz 5 bands 40 channels, with Raceband: 5658-5917 MHZ
- Size: 19.50*14.00mm(L*W)
- Weight: 5g
Adjustable power 25mW/50mW/200mW
Nesan
Reviewed in Canada on January 14, 2025
work as advertised.
Kyle Pollack
Reviewed in Canada on July 24, 2024
super small can be powered from a 1s battery. light enough that wont effect most things you wanna throw fpv onto.
John L.
Reviewed in Australia on May 24, 2024
Very good for light aircraft
Leo
Reviewed in the United States on December 1, 2024
The packaging was decent, the instructions were easy to follow and was able to set it up and get it running in about 2-3 minutes. The camera quality is decent for its size. The range at max is pretty good and will not loose signal when going behind a couple walls in your house. The speed is pretty good and it feels like there is little to no delay from the goggles to the vtx. The only things to keep in mind is that the unit gets very hot when used at max power and the antenna is easy to bend so be careful when setting it up. Otherwise it’s a quick and fun way to add a VTX and Camera unit to your drone or rc car.
Pierre
Reviewed in Canada on November 13, 2024
Not the greatest range. Cheap Amazon crap
Jay Woods
Reviewed in Canada on November 28, 2023
No easier way for fpv on a drone or rc carMy monitor connected quickly and it works great
カスタマー
Reviewed in Japan on November 6, 2022
中国製なので 未だに 到着してない
Scott
Reviewed in Canada on October 4, 2022
Great little AIO. Fantastic picture quality for its size. Decent range at 200mw. Would recommend.
SuperE
Reviewed in Canada on April 6, 2020
I purchased this so that my son can FPV using surface vehicles (from 1/24 to 1/10 scale). It was very easy to set up, thanks to the integrated antenna, but I did need to get a BEC to regulate the voltage of my RC's ECS from 6v to 5v so it can run right from the receiver box.I removed the included plug and soldered on a Futaba servo plug for ease of use, but before that, I was able to use a small 1s lipo to power this, then I tried 4 x AA (NIMH rechargeable at 1.2V each) with success).Selecting the channel and power is quite easy and while most of our driving is through walls, the signal strength and quality have been quite good.We did 3d Print a case for the camera as it's just bare circuit board, but it's light enough to mount anywhere (we use double-sided tape so we can move it from car to car).There is no on-screen-display (OSD), which is a little bit of a bummer as I would have liked to have seen a voltage meter at the very least if I decided to run this off a separate battery pack again).Overall, I'm quite happy with this little guy. The latency is very low (at least for surface RC) and the quality of the picture is better than I expected.
Andre
Reviewed in Canada on September 16, 2018
Wow talk about cool. Works great. Easy to use. I bought for aerial videos from atop my plane. It worked great. Image was clear and smooth. I like this one.
Buffo
Reviewed in the United States on August 26, 2018
I bought two of these cameras with built-in transmitters. I installed one on my modified Inductrix (Tiny Whoop) after the old camera I was using died. Installation was just as easy as the first time around, but this time I was able to set the transmitter power to 50 mw instead of 25 mw, which made a real difference when flying indoors. No more video loss!I installed the second one on a 1/10th scale RC car (just stuck it on the wing with some double-sided foam tape) and set that one to transmit at the 200 mw level. It has great range! I actually lose RC control before I lose video on the car. This is a perfect camera if you're building an indoor racer (quad or RC car), and I think it would probably be OK to use on a small outdoor racing quad as well. For sure it's more than good enough for a dirt track FPV race truck or buggy.Setting the transmitter frequency is very easy thanks to the blue LED display. And the video quality is surprisingly good, especially considering how small and lightweight the package is.For this price, I'm absolutely thrilled with the performance.
Gibson59
Reviewed in Canada on April 30, 2018
Works perfectly right out of the box. It was easy to setup my desired channel and frequency as well as the power setting. I haven't had a chance to test out the range yet due to poor weather. I'm hoping I can get some nice distance with the 200mw setting. Picture quality is pretty good but again, will need to test further outdoors in a variety of lighting conditions.
Recommended Products