Shopping Cart

Your cart is empty.

Your cart is empty.

12 PCS Cargo E Track Rail Mounting Back Plate, Heavy Duty E/X-Track Backing Plate Accessories with Installation Kit

4.3 (5) Write Review
Free shipping on orders over $29.99

$71.11

$ 33 .11 $33.11

In Stock

About this item

  • FUNCTION: As time goes on, the E-track fixed on the wooden board will loosen,or when your cargo is too heavy, your E-track will wobble.At this moment, you need a backing plate to be installed behind the board to fix the E-track
  • APPLICATION: Compatible with all standard universal E-Tracks and X-Tracks. These backing plates are work for single or multiple E-track/X-Tracks mounts
  • NEW DESIGN: Different from others, our back plate fits perfectly with the bolting holes of the E track without skipping the rail hole, thus the screws can be installed in each track hole to make it lock more firmly
  • MATERIAL: High-quality steel plate, no deformation; Galvanized to prevent corrosion and rust. Equipped with locking nuts, avoid the loosening of screws due to wobble
  • SIZE: 3"L * 6"W; Bolting holes on both sides size: 2-1/8" apart on-centers; 1.8mm thickness.Enlarging the bolting holes'diameter to avoid the misalignment of the bolting holes and the E track holes caused by the deviation


Applicable:

The back plates increases the strength and support of the E-track and really helps to tying a heavy load to the E-track

Suitable for all standard universal E-Tracks.These backing plates are work for single or multiple E-track mounts.

Can be installed on various lorries, trailers, trucks, or warehouses

Material:

Alloy steel

1.8mm Thickness

Won't deform;Won't wobble

Installation:

Drill holes on the wooden board to make it aligned with the bolting holes of the backing plate and E track, and then tighten the screws to finish installatin

When used for the standard multiple E-track, it can be installed in the bolting holes on both sides; When used for a single track, it can be installed in the middle bolting hole

Package Contains:

12 Back Plates

48 locknuts

48 bolts

96 Flat Washers

After-Sale Service:

If you have any questions, please feel free to email us.


leigh denton
Reviewed in the United States on September 13, 2024
Got my husband and trailer. So he put these on both sides so he could tie down anything everywhere. He loves them. They are working great.
Bryan
Reviewed in the United States on July 15, 2024
Make sure you measure your rail bolt hole span. This is not a universal mount backing plate.
Ace!
Reviewed in the United States on July 11, 2024
We put the tie-down system in the trailer to haul our motorcycles across the country, we haven’t left yet, but out test run we did passed muster! I think we have a winner!
coues52
Reviewed in the United States on July 1, 2024
they worked great for the E-Track in my trailer
JP
Reviewed in the United States on March 30, 2023
These plates are much stronger than simply using washers and nuts alone to bolt on e-track components. The plates are easy to line up because one set of holes is elongated. I used these plates to attach Rhino USA ATV restraint system. I put the plates on the underside of my trailer floor, so I hit them with a few coats of self-etching primer and covered them over with automotive undercoating.