Your cart is empty.
Your cart is empty.Maurizio
Reviewed in Italy on March 18, 2025
Ottimo come descrizione
Ray
Reviewed in the United States on July 23, 2024
it has always been a complaint of mine that the print bed was not removable on The Flashforge Dreamer. It was a total pain to remove printed items from the print bed. This was a simple install. I did go back in and use rubbing alcohol to make sure that I took all of the adhesive off from of the original bed laminate. Installed the magnet for this one and haven't looked back since. I was amazed with my very first print of pteg filament once I upped the print bed temperature. I did raise the print bed temperature up from 50 Celsius to 70 Celsius. No adhesion issues at all. no glue needed. I would highly recommend this as an upgrade for anyone who owns a Flashforge Dreamer. The only thing I would have done differently is make the handle portion that you grab a little larger and possibly have rubber covering it so you do not risk burning your fingers. You can print back alignment corners for your print bed so that your plate sits in there just perfect each time for easy alignment.
attamans
Reviewed in the United Kingdom on October 9, 2024
A worthwhile upgrade for my Creator Pro 2 printer. Having had problems in the past with prints not sticking to the build plate and coming loose during printing, the AJOYIB double sided textured PEI building plate is a joy to use. Set the build plate temp to 55C for PLA filament, your print will stick and not move during printing and removing finished prints is so easy no need to scraping it off and risk damaging the build plate and printer. for me an easy recommend purchase.
Recommended Products
