Bosch never fails me. I love this router.

Easy to use and well made.

Utilisations pour tous les projets de menuiserie. Super kit à prix très compétitif. La puissance de la toupie (1.25 hp) est parfait pour tous les projets à la maison.

Easy to use one handed.

Powerful for as small as it is and has adjustable to a very fast RPM to help provide clean cuts. Very nice tool.

I bought this router package to supplement its big brother, the MRC23, because I needed to do some delicate, free-hand work. The big MRC, perfect for the big stuff and for table mounting, was just too bulky and heavy for the little jobs. Kudos to me ~ I find that I have made an excellent choice. The little 1.25 horsepower Colt has plenty of power to do all my trim and decorative routing with ease. The single downside is that, as noted by some other reviewers, it does tend to run hot in extended use. At first I found this problem minor and not enough to offset the many other advantages. The more I use it, the more I seem to notice the heat. Not a deal breaker, but definitely an issue.A couple of other reviewers have noted that the fine adjustment on the fixed base does not work properly. Of course, I haven't seen the particular units they complained about, but I have noticed something they might have overlooked. The clamp on the fixed base has three different positions: Locked, which would keep the fine adjustment from working at all; Unlocked, which would make the clamp much too loose to engage the fine adjustment gears; and a middle setting, which is designed to engage the gears without clamping down too tightly on the motor body. I find that when the clamp knob is turned to that middle setting, the fine adjustment works perfectly! After the depth is properly adjusted, you can turn the clamp to the Lock position and you're good to go. Again, I don't know exactly what the other reviewers were experiencing, but perhaps my observations might help.Another reviewer posted a scathing comment on the router after discovering that the unit did not accommodate the (non-U.S.) electrical system in his/her home country. In fact, the Reviewer makes several complaints, none of which accurately lay any blame on the manufacturer. (1) He complains that the cord cap (what he calls a “plug”) is the wrong configuration for the electrical receptacles in his locale. He asserts that he needs a three-prong cap rather than the two-prong cap on the cord. He knowingly purchased this U.S. product on a U.S. market website, ignoring that the same product could be purchased in the Euro version with appropriate Euro cord configuration. His fault. (2) Reviewer then looks for the “UK ready adaptor plug” which he presumes that the manufacturer should have included, but which no manufacturer of electric equipment does. (It wouldn't have helped anyway. He really needs a power converter so that his US tool can work with UK current.) His fault, again. (3) Also, Reviewer complains that he can’t find a power converter (which he thinks is an adaptor) for the cord cap, which means that he hasn’t even looked. Such converters (adaptors) are only sold at EVERY major retailer in both the UK and the U.S., including this site where he bought the router! (4) Reviewer next attempts to remedy the problem by rewiring the cord with a Euro cord cap, ignorant of (or disregarding) the fact that the electrical current systems in the U.S. and Europe are completely different. Merely changing the cord cap is, of course, not only a poor solution, but downright dangerous to the tool and the user. Another “his fault.” (5) Reviewer then expresses his disappointment that it took him a year to discover the existence of the problem, so he can’t get a refund. The fact is (clear from his review) that he bought the tool and then sat on it for a year before he did even so much as plug it in! Totally. His. Fault!(6) Finally, Reviewer concludes that somehow he has been “conned.” It is this last, wholly baseless, accusation that went a step too far and compelled me to write. Not once did Reviewer mention any flaw in materials or workmanship in the tool or any misrepresentation on the part of the manufacturer or the seller. Nobody got "conned!" It is grossly unfair that the manufacturer should be saddled with that horrible and inaccurate review and the accompanying 1-star rating, when the only defective thing here is the Reviewer himself.

I bought this Bosch router kit along with Bosch Router Table RA 1181, assuming that the Bosch router would fit the Bosch router table. Big mistake. When you get to page 16 of the router table assembly manual, you find that most Bosch routers, including this one, do NOT fit that Bosch router table. The manual says to order an adapter plate by Bosch. Turns out, Bosch never made that plate. They send you a blank plate and you have to drill it out yourself! I kept the router table (already assembled) and returned this Bosch router kit to Amazon; to replace it, I bought a Milwaukee router from an outfit in Saskatoon, SK.

Bon produit facile à utiliser!

traie bon service

Well I wanted a router l had never used one before and I really wanted to try one. So I got this but like a fool I didn’t get round to using it for a year. I had a project that I wanted to use it for set it up with the bit and the holder ready to use i and guess what the plug is a two pin plug. No three pin uk ready adapter plug as you would expect, so that’s that then. I can’t find the adapter and this leave me with only the option to reword it with a uk plug. I will do one day but with my disappointment I can’t be bothered now. As far as I am concerned this was a waste of money. Well I wired in a uk plug but guess what it still isn’t right because it is the wrong current. I really regret buying this and more to the point that I took a year to find out so can’t even get a refund. I really think that I have been conned

I've been using it steady at the cottage for the last 4 months and it's amazing! I've done countless pieces of trim now using jack pine that I harvested from my property. Since I purchased this Bosch hand held router from Amazon I honestly could not be any happier!! Thanks for reading my review hope this helps if you're unsure of what to buy!

If you need a palm router this is the one you want to buy. Very nice.

I exclusively bought this router to cut professional slots for door hinges and strike plates. This item did not disappoint. Easy to handle, and does the job in spades. There are so many more uses to this tool I haven't even scratched the surface. If you are new to routers like I was for such a long time, watch a basic UTube video and don't be intimidated. A great tool to have in any DIYer's arsenal.