Very helpful

Should do the job. Very well made item.

Received open pack

There are times when having this decice saves you inordinate amounts of time and money. If that's you, get some and keep them where they are likely needed the most. (Such as compartment on your ATV and tractor.)

Showed up in good time, product is as advertised, an amazing invention!

These are very well made. I had questions on a forum and the owner signed up and answered them all.I’d highly recommend these as an emergency part to keep in any vehicle, off road or ATV or whatever you have.Easy, easy to install.

Nous faisons beaucoup de sentiers et de "overlanding" ... j'ai déjà dépanner un copain avec , ça fonctionne très bien et plutôt résistant pour un truc "d'urgence seulement " ... je recommande fortement

Used on a ATV tire, the stem had deteriorated, and as anyone who has delt with older ATV tires knows trying to break the bead without destroying the tire or creating a bead leak is impossible. Put these in and problem solved.

This product has been around for a long time and is really the standard for this application. I like it, I've used it before and I've bought it again, knowing it will work.

I bought these just to see if they could save me the time/cost of having to remove my rear wheel, drive it down to the local bike shop, and get them to unseat the tire so that they could replace the leaking valve stem. I got a quick quote from a local shop, and they'd want about $80 to just replace the stem.A quick search brought me to this product, something I've never seen/heard of before. And I don't think any of my friends(who like me have worked in the automotive field for years) have seen it either. Since my Kawasaki Z1000 is no longer my main transportation, I figured I'd see if these work. I removed most of the old stem, jammed this new one in as far as I could by hand, and then tightened it. Put air in it and listened for leaks. No leaks. Gave it a little time, checked that the pressure stayed the same. It was good so I rode the bike 20 miles to get it back home to park it. Checked it a few days later, the pressure is still holding just fine.Just allowing me to get home in an emergency would make these a worthwhile addition to a tool kit, along with a tire plug kit. The fact that it seems like it is holding air enough to be a long term fix(until the next tire change) is great!

Awesome pice of kit to add to my tire repair kit on my RZR 1000s side by side. I have destroyed a tire valve that was sliced off by a rock. This unit got me back on the trail within minutes. Very satisfied.

I don't usually bother with product reviews, but this one was such an enormous help! A corroded valve stem came off with the cap when I tried to add air to the tire, and my tire went completely flat. I can fix a lot of things -- from my roof to my dishwasher, but I've never had much luck with auto repair: I don't have the muscle to use hand tools on a car (I have to jump up and down on the wrench to even loosen a lug nut), and no garage means no extensive collection of specialized power tools which could compensate. The alley where I park is not entirely paved, so even positioning a jack is not easy or safe. Add in cold or rainy weather (meaning numb fingers and slippery mud), and I can *maybe* install new windshield wipers... There was NO way I could have done a traditional valve replacement, even a temporary one to limp the car to a repair shop. I tried walking to the one auto parts store within reach, but they had nothing to offer that would do the trick.These valve stems really seemed too good to be true, but my only other option was getting a tow truck and that's NOT cheap (and getting one to where I live is also not a simple proposition, either). So I ordered them and waited the two days for shipping (this was one occasion where I would have gladly paid extra for overnighting them, but expedited shipping wasn't available?). When they arrived, I studied the design and instructions. It wasn't immediately obvious what the instructions meant by "lip of black seal" which had to be "flush against wheel", but after unscrewing the wing nut from the main body of the stem, I realized the black part on the bottom of the main brass body of the stem, right under the brass washer, is actually a hard rubber, and is meant to get pushed down the widening stem bottom to flare around the inside of the wheel to create a seal. So "lip of black seal" is the fat round rubber lip under the brass washer, and the wingnut forces it down the flared bottom of the brass stem. It is an extremely simple and extremely clever design (clever because it's so simple and foolproof). And yes, it works perfectly and EXACTLY as advertised. All I had to do was push the old broken valve stem into the tire (there was a split and corroded collar around it, holding it in place, which I broke off with some pliers) and push the Colby Emergency valve firmly into the hole that was left. I did bring a toothbrush along and cleaned around the hole as much as possible to make extra sure I would get a good seal, but I don't know if that was strictly necessary. Then I tightened the wingnut on top as much as I could (which also bares more threaded stem at the top to connect a pump or compressor). The tire inflated like a charm (during the inflation process, it becomes possible to turn the wingnut further to tighten the seal, and I took full advantage of this, since I didn't have anything handy to supplement what I could manage with my fingers). There are even valve caps in the package, in case yours became unusable along with the valve, as mine did.The whole procedure took maybe 10-15 minutes, and yes, that was in pretty nasty conditions: barely above freezing with a drizzle and barely enough light to see what I was doing. It wasn't 100% tool free, because I did need pliers to get the old, broken valve stem out of the way, BUT your mileage may vary on that point, based on how you came to need an emergency valve stem replacement in the first place. In any case, pliers are something that most people will have on hand or be able to get hold of relatively easily (neighbors, gas stations, convenience stores are all likely to have some). The installation process itself is really as straightforward as the package promises -- which is rare in my experience. It works really well, too: the seal will hold, you can inflate your tire and drive right away (my tire actually stayed inflated overnight, but I imagine that depends on how well you manage to tighten the wingnut). I love that there are two of them in the pack, too, so I can keep one in the car for emergencies.I just wish these things were more widely known and available, because 2-day Prime shipping is great, but "emergency" implies you might not have the luxury of staying put that long, and most people (including myself) don't realize that their tires might go flat not just from a puncture, but from a broken valve stem, right up until it happens. It's really hard to be prepared for something you aren't aware of. And without the option of a spare tire (my car doesn't have one as standard equipment, and doesn't have room for one without installing some non-standard 3rd party kit to carry it), in who knows what conditions and with a bare minimum of tools cars are equipped with, all the tire repair kits in the world won't help. So the second replacement stem along with the packaging, which I was careful to remove undamaged, went into my purse for now, and I'll try to do a little show-and-tell at nearby auto parts stores and gas stations, on the off chance they can be persuaded to start stocking these, and after (probably) developing a bit of a reputation as a crank, it'll be going into the glove compartment, just in case!

Kind of pricey IMO, but the quality shows. These are well finished. Haven't had to try them yet - hopefully never will, but it's nice to know I have them tucked away in case.