Your cart is empty.
Your cart is empty.The DM2 T.N.T is an active inline preamp based on the acclaimed DM1 DYNAMITE – featuring even more gain, less noise and more flexibility so your precious go-to microphones shine like never before. With an integrated recessed gain switch, the DM2 T.N.T lets you choose between a moderate 15 dB or explosive 30 dB of clean, transparent gain for more headroom and a clean signal with an ultra-high impedance input and eight load settings to perfectly match your DM2 T.N.T with any microphone. Intended for direct connection to the output of a passive ribbon or dynamic microphone, the DM2 T.N.T streamlines the traditional inline preamp by eliminating the need for an extra cable, and its compact size makes travel convenient, so the gain you're looking for is always by your side. Switchable, clean and consistent gain from moderate 15 to explosive 30 dB Two gain levels ensure even higher flexibility on various sources, designed for neutral, balanced sound quality and dangerously low noise. The uncompromising design ruthlessly boosts the signal independent from load impedance or cable length. Able to be matched perfectly with any passive microphone to boost the signal, the DM2 T.N.T reduces the likelihood of interference and provides a significantly improved level to your interface/mixer's preamp – all without adding noise or coloration! Get the best out of your mics with variable input load Common inline preamps tend to strain the transducers of passive microphones due to their electronic design, which results in a degradation of sound quality and output level. Thankfully, the DM2 T.N.T's ultra-high impedance input allows for any load on passive microphones to achieve the best out of your mic collection so they can shine like never before! At the twist of a dial, explore eight settings ranging from an unconventionally low 50 O to stunningly high 10 MO to match your preamp with any mic accurately for clear recordings with the lowest noise possible. Built to unleash the best
Dario D'Aversa
Reviewed in Canada on September 16, 2024
Got the DM2 because I needed some inline gain for my SM7b. The main thing I was looking for was something with a lot of gain and the lowest possible self noise, for which the DM2 delivers on both ends. It's amazing... when it works. Unfortunately this requires phantom power to work, which in itself is to be expected, but the reason I'm dropping two stars from this review and saying "when" it works is because in some occasions even if I provide phantom power, it doesn't work. This is especially the case for wireless XLR transmitters -- they all work with condenser microphones (48V phantom power required), but doesn't work there. Also had occasional drop-outs on the H6 when on battery. Maybe I got a faulty device, not sure, but if you're looking to use this in some kind of wireless setup, I don't recommend it -- but with a solid DAW like the Rodecaster Pro 2, it will work fine -- but at that point, you won't need it. So, bottom line, I "kind of" recommend this product.
Jon - Life from my wheelchair & TikTok
Reviewed in the United States on March 29, 2024
This is my first inline mic preamp.The retial box is adorable, well looks like a small TNT stick in the same blue color. And top makes a very satisfying pop sound.Enough gushing over the cute box it comes in.The ability to make fine tuning with the adjustments really makes a difference and very worth trying each until you find what works for you best.I use a Yamaha MG10XU and it provides the 48v Phantom power to activate this preamp. The phantom power does not go past the preamp.I use a SHURE SM7B and while the YAMAHA works fine by itself and for me atheist I found I don't need to turn up the gain as much as most show. I am set up in a very small confined space so most audio settings I use are nothing like the pros suggest. So I won't be suggesting gain settings or impedance suggestions.The build quality is excellent.The ease of use is excellent.The audio quality is excellent. (Make adjustments to find the best for your mic)Reminder this is not for condenser mics.This is for dynamic mics of the XLR variety.Value for the money is excellent.I can highly recommend this for anyone looking for a dynamic mic inline pre-amp.5 stars all day long.
MJ
Reviewed in the United States on April 2, 2024
The Dynamite Active In-line Mic Preamp with Selectable Gain and Impedance is a game-changer for audio recording. Its selectable settings allow for tailored sound, while its sturdy build and portability make it versatile for studio or live use. It delivers clear, transparent sound with minimal noise or distortion, running on phantom power or batteries for added convenience. Highly recommended for musicians, content creators, and audio enthusiasts.
anonymous
Reviewed in India on July 26, 2023
the mic amp gain is low on presonus studio 24c for a dynamic mic SM58. so i had to purchase this and it did the trick. Better option would be to purchase a powerful audio interface or a condensor mic.
Vishal Lakhwani
Reviewed in India on August 9, 2022
Provides good gain to Rode Podmic with low noise
Colin
Reviewed in Australia on October 10, 2022
Have only been able to try this out in a practice session so far. Initial Sound Desk feedback is a big tick.Using with a low output flute mic.
Recommended Products
