Your cart is empty.
Your cart is empty.These graphite-impregnated gaskets resist abrasion and creosote adhesion while providing an excellent seal. Braided to prevent unwinding and built to last, these are the recommended replacement for worn out gaskets in wood or coal burning stoves and fireplaces. Conveniently packaged with E-Z Spread Fiberglass Stove Gasket Cement and available in different sizes.
Trevor Doyle
Reviewed in Canada on January 29, 2025
This did exactly what it was supposed to do. Great value for money great quality and excellent fit.
Red dave
Reviewed in the United States on September 3, 2024
Works well
Manon Gingras
Reviewed in Canada on March 21, 2024
Ever since I changed the door gasket on the fireplace with this kit…the glass stays clean & the wood burns evenly! Terrific product!Highly recommend.
Robert Kunķle
Reviewed in the United States on February 23, 2024
Perfect replacement. Trimmed for length and followed simple directions on adhesive and works great. Problem solved.
matt
Reviewed in Canada on December 21, 2024
Good quality glue that doesn’t run.
Guy
Reviewed in Canada on October 25, 2024
Bought one from a well know company and didn't stick at all. This one worked like a charm. Highly recommended.
Daniel
Reviewed in Canada on April 29, 2024
The glue was unusable as it was all dried up
jamie
Reviewed in Canada on October 11, 2022
Never again will I buy the crappy white ones crappytire sells,These are great quality and well thought out including the YouTube video they have showing proper way to install!DONT BUY THE WHITE TYPES OUT THERE ..THESE ARE WAY BETTER IN EVERY RESPECT!!Thank you rutland..the good ole usa comes though once again !
James Dolan
Reviewed in the United States on December 25, 2019
Recieved on time and installed per instructions , working just fine.
Teresa G
Reviewed in the United States on March 25, 2018
Both the gasket and adhesive are quality products. The adhesive was just the right amount and following directions resulted in proper application and a good seal. Very pleased with the result. It was easy to do but did take a little time. TIP: Don't rush it--allow enough time, do the proper preparation, WEAR GLOVES, and protect your working surface because the black does get on things. This is a very small investment over what it would have cost to have it done by my local wood-stove store, and it only took an hour or so rather than waiting days to get my door back.
gwbod
Reviewed in Canada on November 27, 2018
The gasket was fine but I needed it about 6 inches longer.
Quilter
Reviewed in Canada on August 5, 2016
It's the size and density recommended by the wood stove's manufacturer so I assume it will work fine. Since the gasket requires the stove be fired for a period of time to cure the cement, I'm going to wait for much cooler weather before installing it.
Customer
Reviewed in the United States on August 17, 2014
Unlike some others that have posted, I had no issue using the included adhesive. It's holding nicely on the outside of my Brinkmann smoker, a fairly hostile environment.Like painting, it's all about the prep. I used a wire brush to remove everything - paint, imperfections, etc - then sanded just a bit. Then I cleaned with a rust remover/bare metal prep product I got locally.I really kneaded the adhesive tube as instructed, and pulled the rope around the lid with just a bit of tension and fastened the ends together with a paper clip. In theory, I still couldn't do what the instructions say, which is to glue it in place and close the (oven, fireplace?) door to press it in place. I didn't have that luxury.I did take the lid and set it outside in the sun after an hour...on a 92 degree day around noon in south Florida - my version of curing the adhesive.So I have had it for 6 weeks or so. It sits outside, covered sometimes, not always, and I've used the smoker 3 times since then. Doesn't appear to budge. I imagine I could rip it off, but why?If you're buying this to seal your smoker, I highly recommend it. The size is great, and the black adhesive included with mine worked great and setup fast.
Recommended Products
$9.66
$ 5 .03 $5.03