Your cart is empty.
Your cart is empty.WochiTV Solid Rubber Strips Rolls, 12" Wide x 1/8" Thick x 12" Long Neoprene Rubber Sheets Perfect for DIY Gasket Material, Sealing, Liner, Shield, Padding, Mat
Nitro Nick
Reviewed in the United States on February 8, 2025
This saved my ass cause I couldn’t find the large rubber washers/gaskets to replace the old ones on a water softenerIf you’re intelligent enough to use a pair of scissors and a razor blade you’ll do just fine with this stuff
Corn
Reviewed in the United States on February 5, 2025
A little thick in my opinion. And the material is a bit harder than I'd prefer
Otto
Reviewed in the United States on February 5, 2025
Worked good tho
Scotty J
Reviewed in the United States on December 10, 2024
This is what I was looking for. You can instantly feel how solid this rubber is, it's heavy, flexible and exactly what you'd hope it to be. The closest comparison to this would be an actual semi truck's mud flaps, which are extremely durable just like this product is.
Kevin
Reviewed in the United States on September 12, 2023
Gaskets can sometimes be hard to source. I fixed my riding lawn mower several years ago by making my own gasket from a bicycle innertube. It was a carburetor gasket that time. I don't expect it to fail any time soon either. This WochiTV Solid Rubber Sheets checks all the boxes. The trick is to get a template of the gasket you need. I traced the outline on a sheet of paper. Then cut. It will cut with scissors, but I found that the easiest way to cut this is with a sharp utility knife.I used this to fix a failed gasket on my boiler's circulation pump. It has a small leak that probably could have been fixed with silicone, but I wanted a more permanent fix. Unfortunately, the old gasket fell apart as I was removing it. Otherwise, that would have been the perfect template. The last picture shows my finished gasket. I did make some more cuts to make it fit better. The boiler system operates at 180 degrees Fahrenheit and varies from 12 to 20 pounds of pressure. I don't think this homemade gasket will fail for years, if at all.I got the 1/8" thick gasket material but could have used the 1/16" just as well. The rubber does have some 'give' to it so when I tightened down the bolts, it compressed nicely. Sort of what you want a gasket to do. This helps provide a nice tight, leak resistant seal. I wouldn't be reluctant to use this on a more demanding project.The material appears to be well made and sturdy. It wants to hold the shape of the roll it is shipped in, but with some work I was able to flatten it out. Great product to have on hand for the occasion when stores are closed, or you can't find the right gasket. I assume this material can be used for many other things. I have enough left over when I do find another use. Great product. Great price.
Recommended Products
$18.60
$ 9 .35 $9.35
$15.49
$ 6 .47 $6.47