Your cart is empty.
Your cart is empty.Product Description
Efficient Organization
The charging head will have a comfortable area and be properly placed to extend its life
Tidy Floors
Keeps your cables neat and tidy, won't snag or fall out, and keeps your garage organized
Customize the Height of Use
Make your own decisions about the proper mounting height to accommodate your vehicle's charging ports and to maximize cable length
Easy to Use
After use, simply roll up the cable and hang it on the hook without the hassle of storage
Strudy Stainless Steel
The charger organizer is made of high-strength stainless steel, which is strong and durable and won't oxidize and cause breakage like plastic. The sturdy material supports the charging port well and keeps it firmly in place.
MultiFunctional
The stainless steel material is also coated with a special rust-resistant coating that prevents scratches and abrasions, keeps the surface smooth, and prevents rusting while preventing the cable from being scratched.
Rust Proof
The multifunctional hook allows you to coil and hang the cord after each charge, which is a very practical way to store it. You can also hang various tools on the hook while washing your car or performing other care activities.
Rain Proof Cover
All-around protection with rain flaps ensures that the inside of your charging head won't get wet outdoors, and the rain flaps are also located on both sides to keep rain from entering from the sides. (When the charging head is unplugged on a rainy day, water droplets will inevitably enter, so it is recommended to dry the inside of the charging head when putting it back in place)
- For use with standard J1772 chargers. Please check the dimensions of the charging box.
- BMW CHARGER CONTROL BOX SPECIAL NOTE: The dimensions of this charger box holder are 4.82 inches in length, 4.69 inches in height, and 3.61 inches in width, please measure your charger control box to make sure that it is no more than 4.25 inches in length and 3 inches in width.
Hook Organizer
- The charging head stand is compatible with all J1772 connectors. Insert the EV home charger into the base until it snaps into place.
- The holster will lock the nozzle securely in place, preventing it from falling out, so you'll never have to adjust the charger's position on the shelf again. In addition, the hooks extend the life of your EV charger by holding the cable securely to the ground, preventing kinks and tangles.
- Charger Holder+Box Holder Set
- Complete with accessories, ready to install upon receipt
- Made of Hard Steel
Installation Guide
Select and Mark the Mounting Place, then Punch Holes
The screw size is M3.5*25 (the diameter of the screw hole is 3.5mm), if you are not sure about the size and diameter of the hole, you can drive the screw into the wall first, then take out the screw, and after a simple sanding, the hole is done.
Plug the Expansion Sleeve
- Plug the expansion sleeve into the hole and make it flush with the wall.
- It may happen that the hole is too small for insertion, so you can ream the hole slightly and sand the hole, then plug the expansion sleeve in (you can hit it with a hammer, but do not break the expansion sleeve).
- The depth of the expansion sleeve should preferably be more than 5 mm.
Install the Screws
- Install the screws and secure them in the expansion sleeves.
- When using a screwdriver, excessive force or rotation may damage the expansion sleeve.
Required Tools
- Screws and Expansion Sleeves (Included)
- Hammer
- Cross-Shaped Screwdriver Or Electric Drill
Applicable Scene
Garage Wall
Mounted on the walls of parking lots and garages, you can choose the right height for quick and easy charging.
Charging Post
Installed on the post, more eye-catching and convenient, suitable for outdoor parking lots with posts
Home Charging Box
Mounted in a DIY charging case for safety and cleanliness
Johnny Cheung
Reviewed in Canada on August 13, 2024
I chose this holder specifically because of the design.The nozzle fits snugly - and stays in place.The J-hook can securely bear the weight of a thick Level-2/Level-3 charging cable roll of a standard length.
jacqueslemire
Reviewed in Canada on August 10, 2024
fait solide
C&C
Reviewed in Canada on July 30, 2024
These holders are made of metal and heavy. It's easy to install with the included screws. The charger lay snuggly into the holder and the cable holder is wide enough to hold the 16ft cable no problem. Note this only fit the J1772 so if you have the Tesla adapter, you will not be able to fit it in as is, you will need to remove the adapter to fit the head into the hole. The only thing I would have liked to see is the charger box holder (which is metal inside and out) have rubber or some type of cushion inside to prevent scratching the charger box.
Recommended Products
$1,078.75
$ 74 .69 $74.69