Awesome beautiful lights , it’s great to adjust to were you want them to display.

I purchased this to use in a visitor's center where a bulletin board resides, Due to the structure of the room the alcove was always dark, it was a little tricky getting it on the wall, and the LED also needed some patience to install, When it was all put together and turned on it was perfect. We liked how we could flex the light onto the wall giving optimum visual experience to the art work.

Easy to install...very bright...good quality.

I bought three of these for our cottage. They mount high on a wall, looking down into out living and kitchen areas. The are well finished and easily installed and aimed and adjusted.

I have like 13 of these now and they are not only nice looking and well designed they are a great way to bring light to my plants at a very competitive price giving the user good value for their dollar

Product is sturdy and has a very good finish. Comes with 4 light bulbs that together are quite bright. Very happy with the quality and price. Installation was easy, although it would be better if a hook was provided to temporarily hang this from the bracket while connecting wires (requires two people to do the installation otherwise).

Love the look and the quality. I have it at top of a stairwell so have the lights angled to light up the whole area. Would definitely recommend.

These are freaking awesome! Very unique and well made! I bought an adapter and turned them into a 12 volt system and installed them in my rv I’m remodeling and hardwired them in with a dimmer. Was looking into others that were anywhere from 2 to 4 times the price and not nearly as nice! You can’t go wrong here.

If you intend to mount this lamp on the wall, the 5 foot long CORD may be TOO SHORT. I intended to mount above a window and conceal the wire along the edge of the window sill. In order to do this I would have needed to use an additional extension cord which would have been too unsightly. Instead of mounting as I had planned the fixture has found another purpose as a table lamp.Other than the cord, I found this product to be satisfactory. Nice quality. 4 stars

Disclaimer - my son is an electrician so I received help from him. Ensure you turn your breaker off (or remove the fuse in your panel) and test for current BEFORE installing this item.Installed as a replacement for over a kitchen sink and so the angle was awkward. However, was able to get the mounting bracket in after removing the old fixture. It was not super easy but I am not at all good at installing. The overhead mounting surface was pressboard or something, so I had to be careful with the plastic drywall mounts and not be too rough. The end result was pretty good and the rotating mount allowed for some adjustment after the screws were in, which was cool. Clipping the fixture onto the mounting bracket was pretty easy, but not without some fussing getting the wires all bunched up inside and not poking out. The set screws that hold the fixture onto the bracket were a little tough to adjust, so if you are limited in space you might have to be creative. Anyone with experience will find this a cinch.The fact that it came with 3 LED bulbs was a real bonus. I was expecting to have to buy them separately. Very nice.

This 4 light track light does not disappoint. Very easy install. Comes fully equipped with all parts to install. Basic electrical including white, black and ground wires. My kitchen is so much brighter and I really like the abity to position the lights where I want them. I prefer a higher white lumen but these will do until they need to be replaced. For this price and quality and the four bulbs included it's a steal. You will not find a light like this under $80 anywhere. If you're thinking about it, don't hesitate. Love the industrial flair as well which is a nice change from the traditional track light I had for years.

This can be a bit of work to install especially if you assume all the parts are provided which are not, and if the directions are right, which they aren't. Here is how to install, step-by-step.TURN OFF THE BREAKER TO THE CEILING FIXTURE. TEST THAT IT IS OFF WITH A CIRCUIT TESTER OR MULTIMETER. NEVER TOUCH THE BLACK AND WHITE WIRES NOR LET THEM TOUCH METAL. WEAR RUBBER SOLED SHOES. STAND ON AN INSULATING MATERIAL (WOOD).1. This is the 4 light fixture2. There is NO bracket as shown in the instructions. Thus you won't use the supplied drywall fasteners and screws. This is not an issue because I think a separate bracket would make this more difficult.3. Not to fret - there is a round bracket the size of the ceiling junction box. You use that. This is more typical for lightweight fixtures.4. The round bracket has two long thin machine screws which will eventually protrude through the two holes in the base of the fixture. They protrude towards the floor on the outside, to eventually have the closed nuts applied to hold the fixture up.5. Prefit the fixture (before wiring or anything) to determine how long these machine screws need to be. As supplied they are too long (1/4 to 3/8"). The nuts that go on to hold up the fixture are closed at one end so if too much machine screw is coming through the holes, it will not be hard fast to the ceiling. So adjust their length first (make them shorter at the round bracket, then tighten the nut that holds them in the circular bracket). If you don't read this and get there you can also use either washers or machine nuts over the excessively long machine screws, and then just put the decorative cap nuts on afterwards.6. When the circular bracket is attached to the ceiling junction box (see note 8), you will now see both two machine screws sticking down (the ones you just adjusted) and a green ground screw. Now you can see what happens if those two machine screws are too long. They will poke through the holes in the fixtures but be too long to accept the short closed end nuts. End result - the fixture will not touch the ceiling firmly.7. Fasten the bare ground wire to the green screw first. Done tightly and properly the fixture can delicately hang free while you fit it to the two machine screws. It is quite lightweight.8. A word of warning. Machine screws supplied, that you use to fasten the round bracket to the junction box are also quite long. Not a problem but use a light to assess what they are touching when they are tightened to hold the bracket to the junction box. Done carelessly, you can pierce wires in the junction box and cause a short. Watch them ALL the way as they are screwed in. You might have two machine screws in the box from another bracket or a light you are removing. If so, use those. Just watch what they touch inside the box.9. There are NO suction cups (they say there are - wrong!) provided to put in the bulbs. Not a worry.10. On the side of each socket is a bracket with two flathead screws. Loosen them and the socket moves easily towards the ring where the bulb is installed. Move it up, put in and twist the bulb (there are keyholes in the sockets). Then after you tighten the bulb, move the socket down and tighten the flathead screws on the side brackets.I replaced a track light with transformers going bad that used 150W total halogen for three bulbs and this is now 4 bulbs with better coverage, plus the LED bulbs should never die and power use will go down about 80%.

Love these! The stainless is very nice and a very nice weight! We have a 1904 farmhouse with 1959 Baltic Birch plywood cabinets. (We could totally revamp these cabinets to make a country kitchen more in tune with the period of the house, but as we have a lot of mid-mod furniture I was trying to make these cabinets work as is). I originally planned on mounting these lights on the wall above the cabinets, to look kind- of like track lighting, but ended up just using them as spot lights, even though I don't have enough room to point them at anything directly.. They make a huge difference in brightening up the dead area. I would also recommend using them next to a bed, or over a painting, anywhere you need an ultra modern light! I will buy more, as they are a fantastic value! They look WAY more expensive than their cost! Grab while they exist! The wall plate is very nice, too ( not possible to see in my photo)