Shopping Cart

Your cart is empty.

Your cart is empty.

Model 2012-AGM: 12Volt-2 Amp Battery Charger Maintainer/Desulfator for Odyssey, Optima and AGM Lead-Acid Batteries - Designed for Cars, Trucks, Motorcycles, ATV, Boat, RV, etc.

Free shipping on orders over $31.42

$114.37

$ 52 .05 $52.05

In Stock

About this item

  • EXTENDED BATTERY LIFE - Automatic full time desulfator reverses sulfation (a buildup of lead sulfate crystals) the primary cause of early battery failure by using a patented range of high frequency pulse desulfation (not high voltage) to safely remove sulfation and recondition weak 12V AGM batteries. Sulfated batteries once considered beyond recovery can now be brought back to long-term useful condition. Extending battery life up to four times when compared to new batteries not being properly
  • AMBIENT TEMPERATURE SENSOR – Installed temperature compensation precisely adjusts battery voltage based on temperature sensor readings. This ensures your battery will always be properly charged and maintained no matter what conditions it is subject to. Reverse polarity, short-circuit and over temperature protection.
  • SIX BATTERIES AT A TIME - Maintains up to six 12V AGM batteries (of the same type) at a time when connected in parallel. Requires the use of Y-Connectors 210AY (sold separately). Intended for High-Performance AGM Sealed Batteries such as Odyssey, Hawker and other AGM batteries that contain Pure Lead Thin Plate Technology (PLT). Worldwide 100-240 VAC 50/60 Hz input.
  • INCLUDES – Included in the box is Model 2012-AGM, an installed Ambient Temperature Sensor, 2’ Battery Clip Cord with Quick Connector, 2’ Fused Ring Terminal, and a 6’ AC and 6’ DC cord.
  • FCC CERTIFIED - Certified by the California Energy Commission as meeting the current efficiency standards which means it meets strict energy efficiency guidelines set by the US Environmental Protection Agency and the Department of Energy.



Product Description

BatteryMINDer 2012-AGM is a SmarTECHnology microprocessor controlled charger/maintainer/desulfator for High-Performance AGM Sealed Batteries such as Odyssey, Hawker and other AGM batteries that contain Pure Lead Thin Plate Technology (PLT). Plug 'n Run feature means "no buttons to push." It is designed with 7-stages and is fully automatic. This charger actively monitors your battery's voltage, amperage acceptance and temperature at all times.

  • Will not overcharge, regardless of how long connected.
  • Temperature compensation ensures proper charge in hot or cold environments.
  • Installed ambient temperature sensor for 0°F–130°F operating range ensures the battery will never be overcharged or undercharged regardless of temperature extremes. Optional "at the battery" sensor is also available for greater accuracy when battery and charger are not in same ambient temperature environment.

  • Diagnostic LED indicators for power, polarity reversal, battery weak, load, bad cell, testing, desulfating, temperature compensation, charging stage and charge level.
  • Maximizes battery life and capacity, reconditions weak batteries.
  • Plug 'n Run operation-no buttons to push.

What's in the Box

  • Model 2012-AGM Charger-Maintainer-Desulfator
  • Ambient Temperature Sensor (installed)
  • Battery Clip Cord Set with Quick Connector
  • Ring Terminal Cord Set with Quick Connector
  • 6’ AC cord, 6’ DC cord with quick connector (SAE)

JavEspi
Reviewed in the United States on March 9, 2025
This is specially designed for AGM batteries. I haven’t had any issues over this winter. Recommended by Indian for the Challenger.
todaroj
Reviewed in the United States on February 15, 2025
Doing the job expected in extremely cold temperatures.
Customer
Reviewed in the United States on January 17, 2025
This is awesome keeps Rzr battery topped off and at a safe level while compensating for the outside temperature
Eduardo F.
Reviewed in Mexico on January 26, 2024
Excelente para la chief 2022
DMS Canada
Reviewed in Canada on May 30, 2022
Product arrived on time and in good packaging. The charger is perfect for AGM batteries only. Used on an Indian motorcycle battery to counteract discharge. The four star rating is only because it does not have a real-time readout which is not really an issue but would be nice to have.
Customer
Reviewed in Canada on May 22, 2022
On the plus side: excellent device for rejuvenating sulfated 12 V batteries - (it really works, although it may take from several days up to 2 weeks to accomplish the process), fully automatic, long AC and DC cables, water resistant, sturdy build.On the negative side: there are 4 different models of the device each of them working only with one particular type of the 12 V battery; rather very expensive considering its limited use with only one type of battery. Endorsed and recommended - in my case for AGM batteries!Additional note after a year: this device is not a battery charger! It primary purpose is desulfating the battery! It has to be run a few times if the battery is in very bad shape. I consider the device to be very useful if used properly!!!
Customer
Reviewed in Canada on February 14, 2021
The charging process it goes through is very effective.
TeeJay
Reviewed in Canada on January 30, 2021
I wanted to like this charger as I have and like the regular 'non AGM' 2012 model. Have 3 AGM North Star batteries wired in parallel that I wanted to keep properly charged. Specs on these is that they need 2.27V/cell float voltage (13.6V/battery) and this charger describes that after bulk/absorption, the float voltage provided is 13.6V. However when I measured, I got 13.24V. I tried twice to charge with same results. Over time this lower voltage could harm AGM batteries. I tried my 'non AGM' charger, and it gave 13.4V which is correct for regular lead acid batteries. Now I would have thought that this unit was just defective, but when I looked at the included manual, the float voltage for every type of battery was listed at 13.2V - which is clearly incorrect. The same owner's manual (same revision B) for my non AGM charger lists 13.4V for regular batteries and 13.6V for AGMs! Printing error or did they change output voltages? So I went to BatteryMinder web site and online Revision C manual (which I assume is latest and correct) lists correct 13.4V for regular batteries and 13.6V for AGM. I am returning the charger as I do not have time to sort this mystery out. I did call and email BatteryMinder tech support , but no response. Safe to say, I would advise buyers to check the float voltage on their 2012 AGM model chargers, and confirm that you are delivering correct 13.6V to your batteries.
Customer
Reviewed in Canada on March 2, 2020
Happy with the delivery, came 1 day early and works as it should. Brand new in the box with all packaging in place.
Louis Gagnon
Reviewed in Canada on March 13, 2020
Great product, well protected and does whats its supposed to do.
Old School Techie
Reviewed in Canada on November 25, 2019
I have this on a battery that runs an inverter, which runs a sump pump. So there is a light load on the battery due to the inverter sitting idle. It has performed well for approximately one year now. I also have another one that is a 2/4/8 amp model for general charging of various other batteries, not on a constant basis though. I like them both very well. It may be a little more expensive but I like the lights on them, so you can tell what the status is at a glance.
DoItUrSelfer
Reviewed in the United States on November 16, 2014
I was looking for a smart charger for my AGM battery for use with my portable emergency radio communications and found this unit. It is designed for AGM battery charging which requires a different charging profile as compared to typical automotive chargers used for "wet" (flooded) lead acid batteries. If you use these old style chargers, they will undercharge an AGM battery potentially shortening its life. The BatteryMINDer on the other hand is a smart charger with a processor to control charging, testing and maintenance modes, all automatically. I leave it connected full-time and watch it periodically test and top charge my battery. Its desulfation mode is particularly helpful for improved longevity. I know the battery will perform optimally when I need to use the radio.UPDATE 2/23/16: Have been using charger for over a year on the now 4+ year old battery. It has done a great job maintaining the available capacity of this aging battery. I expect to exceed the battery's rated lifespan and still get reliable use when needed.UPDATE 12/30/2022: This battery maintainer is still going strong, and also is the same (now nearly 10 year old) battery! I will admit that I have not done a load test on this old battery, but it is still powering the radio equipment quite well. I'm still sold on good desulfation type battery chargers.
Recommended Products

$128.24

$ 59 .59 $59.59

4.8
Select Option